diff options
Diffstat (limited to 'arch/arm64/boot/dts/apple/t8103-j293.dts')
| -rw-r--r-- | arch/arm64/boot/dts/apple/t8103-j293.dts | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts index 56b0c67bfcda..e2d9439397f7 100644 --- a/arch/arm64/boot/dts/apple/t8103-j293.dts +++ b/arch/arm64/boot/dts/apple/t8103-j293.dts @@ -17,6 +17,14 @@ compatible = "apple,j293", "apple,t8103", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M1, 2020)"; + /* + * All of those are used by the bootloader to pass calibration + * blobs and other device-specific properties + */ + aliases { + touchbar0 = &touchbar0; + }; + led-controller { compatible = "pwm-leds"; led-0 { @@ -49,3 +57,63 @@ &fpwm1 { status = "okay"; }; + +&spi0 { + cs-gpios = <&pinctrl_ap 109 GPIO_ACTIVE_LOW>; + status = "okay"; + + touchbar0: touchbar@0 { + compatible = "apple,j293-touchbar"; + reg = <0>; + spi-max-frequency = <11500000>; + spi-cs-setup-delay-ns = <2000>; + spi-cs-hold-delay-ns = <2000>; + reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j293.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + touchscreen-inverted-y; + }; +}; + +/* + * The driver depends on boot loader initialized state which resets when this + * power-domain is powered off. This happens on suspend or when the driver is + * missing during boot. Mark the domain as always on until the driver can + * handle this. + */ +&ps_dispdfr_be { + apple,always-on; +}; + +&display_dfr { + status = "okay"; +}; + +&dfr_mipi_out { + dfr_mipi_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&dfr_panel_in>; + }; +}; + +&displaydfr_mipi { + status = "okay"; + + dfr_panel: panel@0 { + compatible = "apple,j293-summit", "apple,summit"; + reg = <0>; + max-brightness = <255>; + + port { + dfr_panel_in: endpoint { + remote-endpoint = <&dfr_mipi_out_panel>; + }; + }; + }; +}; + +&displaydfr_dart { + status = "okay"; +}; |