diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 282 |
1 files changed, 279 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index fdeb4176fc33..757a34ba7da3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -2,7 +2,7 @@ /* * Device Tree file for NXP LS1028A RDB Board. * - * Copyright 2018 NXP + * Copyright 2018-2021 NXP * * Harninder Rai <harninder.rai@nxp.com> * @@ -16,8 +16,22 @@ compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; aliases { + crypto = &crypto; serial0 = &duart0; serial1 = &duart1; + mmc0 = &esdhc; + mmc1 = &esdhc1; + rtc1 = &ftm_alarm1; + spi0 = &fspi; + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port2; + ethernet2 = &mscc_felix_port0; + ethernet3 = &mscc_felix_port1; + ethernet4 = &mscc_felix_port2; + ethernet5 = &mscc_felix_port3; + ethernet6 = &mscc_felix_port4; + ethernet7 = &mscc_felix_port5; + ethernet8 = &enetc_port3; }; chosen { @@ -28,6 +42,154 @@ device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0000000>; }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai4>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; +}; + +&can0 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&can1 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&enetc_mdio_pf3 { + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + + /* VSC8514 QSGMII quad PHY */ + qsgmii_phy0: ethernet-phy@10 { + reg = <0x10>; + }; + + qsgmii_phy1: ethernet-phy@11 { + reg = <0x11>; + }; + + qsgmii_phy2: ethernet-phy@12 { + reg = <0x12>; + }; + + qsgmii_phy3: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&enetc_port0 { + phy-handle = <&sgmii_phy0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; + +&enetc_port2 { + status = "okay"; +}; + +&enetc_port3 { + status = "okay"; +}; + +&esdhc { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&fspi { + status = "okay"; + + mt35xu02g0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; /* 8 SPI Rx lines */ + spi-tx-bus-width = <1>; /* 1 SPI Tx line */ + reg = <0>; + }; +}; + +&ftm_alarm1 { + status = "okay"; }; &i2c0 { @@ -39,6 +201,53 @@ #address-cells = <1>; #size-cells = <0>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + /* Atmel AT24C512C-XHDB: 64 KB EEPROM */ + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + #address-cells = <1>; + #size-cells = <1>; + }; + + /* AT24C04C 512-byte DDR4 SPD EEPROM */ + /* Documentation says 0x51, but must be even and i2cdetect says 0x52 */ + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <1>; + }; + + /* Atmel AT24C02C-XHMB: 256-byte EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + sclk-strength = <3>; + }; + }; + i2c@2 { #address-cells = <1>; #size-cells = <0>; @@ -56,6 +265,12 @@ #size-cells = <0>; reg = <0x3>; + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; @@ -64,10 +279,71 @@ }; }; -&duart0 { +&mscc_felix { status = "okay"; }; -&duart1 { +&mscc_felix_port0 { + label = "swp0"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy0>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port1 { + label = "swp1"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy1>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port2 { + label = "swp2"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy2>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port3 { + label = "swp3"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy3>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port4 { + status = "okay"; +}; + +&mscc_felix_port5 { + status = "okay"; +}; + +&optee { + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&sai4 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb1 { status = "okay"; }; |