diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi | 71 |
1 files changed, 45 insertions, 26 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi index 995b44efb1b6..3d66c6701342 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright (C) 2022 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> */ #include "imx8mm.dtsi" @@ -53,15 +52,15 @@ ddrc_opp_table: opp-table { compatible = "operating-points-v2"; - opp-25M { + opp-25000000 { opp-hz = /bits/ 64 <25000000>; }; - opp-100M { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp-750M { + opp-750000000 { opp-hz = /bits/ 64 <750000000>; }; }; @@ -69,7 +68,6 @@ /* Ethernet */ &fec1 { - fsl,magic-packet; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; pinctrl-names = "default"; @@ -102,6 +100,8 @@ status = "okay"; som_flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; @@ -111,7 +111,7 @@ }; &gpio1 { - gpio-line-names = "nINT_ETHPHY", "", "WDOG_INT", "X_RTC_INT", + gpio-line-names = "", "", "WDOG_INT", "X_RTC_INT", "", "", "", "RESET_ETHPHY", "", "", "nENABLE_FLATLINK"; }; @@ -149,7 +149,6 @@ regulator-max-microvolt = <3300000>; regulator-min-microvolt = <1800000>; regulator-name = "NVCC_SD2 (LDO2)"; - vselect-en; regulator-state-mem { regulator-off-in-suspend; @@ -160,11 +159,13 @@ regulator-always-on; regulator-boot-on; regulator-max-microvolt = <2500000>; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <2500000>; regulator-name = "VCC_ENET_2V5 (LDO3)"; regulator-state-mem { - regulator-off-in-suspend; + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <2500000>; + regulator-suspend-min-microvolt = <2500000>; }; }; @@ -210,7 +211,7 @@ }; }; - reg_vdd_gpu: buck3 { + reg_vdd_vpu: buck3 { regulator-always-on; regulator-boot-on; regulator-max-microvolt = <1000000>; @@ -284,9 +285,28 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sn65dsi83>; reg = <0x2d>; + vcc-supply = <®_vdd_1v8>; status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + bridge_out: endpoint {}; + }; + }; }; + /* EEPROM */ eeprom@51 { compatible = "atmel,24c32"; pagesize = <32>; @@ -294,17 +314,22 @@ vcc-supply = <®_vdd_3v3_s>; }; + /* RTC */ rv3028: rtc@52 { compatible = "microcrystal,rv3028"; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rtc>; reg = <0x52>; }; }; -/* EMMC */ +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; +}; + +&mipi_dsi_out { + remote-endpoint = <&bridge_in>; +}; + +/* eMMC */ &usdhc3 { assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; assigned-clock-rates = <400000000>; @@ -339,10 +364,10 @@ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90 MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x16 MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x16 - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x16 - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x16 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x16 - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x16 + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x12 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x12 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x12 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x12 MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x10 >; }; @@ -372,12 +397,6 @@ >; }; - pinctrl_rtc: rtcgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0 - >; - }; - pinctrl_sn65dsi83: sn65dsi83grp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x0 |