diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 52 |
1 files changed, 23 insertions, 29 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index c528594ac442..d29710772569 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -18,20 +18,6 @@ rtc1 = &snvs_rtc; }; - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = <0 45 63 88 119 158 203 255>; - default-brightness-level = <4>; - /* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */ - enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>; - power-supply = <®_3p3v>; - /* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */ - pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; - status = "disabled"; - }; - /* Fixed clock dedicated to SPI CAN controller */ clk40m: oscillator { compatible = "fixed-clock"; @@ -66,13 +52,6 @@ status = "disabled"; }; - panel_lvds: panel-lvds { - compatible = "panel-lvds"; - backlight = <&backlight>; - data-mapping = "vesa-24"; - status = "disabled"; - }; - /* Carrier Board Supplies */ reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; @@ -165,6 +144,19 @@ startup-delay-us = <20000>; }; + reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vsel>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + states = <1800000 0x1>, + <3300000 0x0>; + regulator-name = "PMIC_USDHC_VSELECT"; + vin-supply = <®_nvcc_sd>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -290,7 +282,7 @@ "SODIMM_19", "", "", - "", + "PMIC_USDHC_VSELECT", "", "", "", @@ -549,7 +541,7 @@ }; eeprom@50 { - compatible = "st,24c02"; + compatible = "st,24c02", "atmel,24c02"; pagesize = <16>; reg = <0x50>; }; @@ -654,7 +646,7 @@ /* EEPROM on display adapter (MIPI DSI Display Adapter) */ eeprom_display_adapter: eeprom@50 { - compatible = "st,24c02"; + compatible = "st,24c02", "atmel,24c02"; pagesize = <16>; reg = <0x50>; status = "disabled"; @@ -662,7 +654,7 @@ /* EEPROM on carrier board */ eeprom_carrier_board: eeprom@57 { - compatible = "st,24c02"; + compatible = "st,24c02", "atmel,24c02"; pagesize = <16>; reg = <0x57>; status = "disabled"; @@ -806,6 +798,7 @@ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_usdhc2_vqmmc>; }; &wdog1 { @@ -1227,13 +1220,17 @@ <MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x6>; /* SODIMM 76 */ }; + pinctrl_usdhc2_vsel: usdhc2vselgrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x10>; /* PMIC_USDHC_VSELECT */ + }; + /* * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here. */ pinctrl_usdhc2: usdhc2grp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90>, /* SODIMM 78 */ <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x90>, /* SODIMM 74 */ <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x90>, /* SODIMM 80 */ @@ -1244,7 +1241,6 @@ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94>, <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x94>, <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x94>, @@ -1255,7 +1251,6 @@ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96>, <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x96>, <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x96>, @@ -1267,7 +1262,6 @@ /* Avoid backfeeding with removed card power */ pinctrl_usdhc2_sleep: usdhc2slpgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x0>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x0>, <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x0>, <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0>, |