diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi | 384 |
1 files changed, 384 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi new file mode 100644 index 000000000000..825ad6a2ba14 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 Josua Mayer <josua@solid-run.com> + */ + +#include <dt-bindings/leds/common.h> + +/ { + aliases { + rtc0 = &carrier_rtc; + rtc1 = &snvs_rtc; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led-0 { + label = "D30"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-1 { + label = "D31"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-2 { + label = "D32"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-3 { + label = "D33"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-4 { + label = "D34"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + rfkill-mpcie-wifi { + /* + * The mpcie connector only has USB, + * therefore this rfkill is for cellular radios only. + */ + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&mpcie_rfkill_pins>; + label = "mpcie radio"; + radio-type = "wwan"; + /* rfkill-gpio inverts internally */ + shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + vmmc: regulator-mmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc_pins>; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + startup-delay-us = <250>; + }; + + vbus1: regulator-vbus-1 { + compatible = "regulator-fixed"; + regulator-name = "vbus1"; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&vbus1_pins>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vbus2: regulator-vbus-2 { + compatible = "regulator-fixed"; + regulator-name = "vbus2"; + gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&vbus2_pins>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + v_1_2: regulator-1-2 { + compatible = "regulator-fixed"; + regulator-name = "1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmpcie { + /* supplies mpcie and m2 connectors */ + compatible = "regulator-fixed"; + regulator-name = "vmpcie"; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&vmpcie_pins>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +/* mikrobus spi */ +&ecspi2 { + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&mikro_spi_pins>; + status = "okay"; +}; + +&gpio1 { + pinctrl-0 = <&mpcie_reset_pins>; + pinctrl-names = "default"; + + mpcie-reset-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + output-low; + line-name = "mpcie-reset"; + }; +}; + +&i2c3 { + carrier_eeprom: eeprom@57{ + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; + + carrier_rtc: rtc@69 { + compatible = "abracon,ab1805"; + reg = <0x69>; + abracon,tc-diode = "schottky"; + abracon,tc-resistor = <3>; + }; +}; + +&iomuxc { + csi_pins: pinctrl-csi-grp { + fsl,pins = < + /* Pin 24: STROBE */ + MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x0 + >; + }; + + led_pins: pinctrl-led-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x0 + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x0 + MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x0 + MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x0 + MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28 0x0 + >; + }; + + mikro_int_pins: pinctrl-mikro-int-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x0 + >; + }; + + mikro_pwm_pins: pinctrl-mikro-pwm-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x0 + >; + }; + + mikro_rst_pins: pinctrl-mikro-rst-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x0 + >; + }; + + mikro_spi_pins: pinctrl-mikro-spi-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x40000 + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82 + >; + }; + + mikro_uart_pins: pinctrl-mikro-uart-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x140 + MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x140 + >; + }; + + mpcie_reset_pins: pinctrl-mpcie-reset-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x0 + >; + }; + + mpcie_rfkill_pins: pinctrl-pcie-rfkill-grp { + fsl,pins = < + /* weak i/o, open drain */ + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x20 + >; + }; + + usb_hub_pins: pinctrl-usb-hub-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x0 + >; + }; + + usdhc2_pins: pinctrl-usdhc2-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140 + MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140 + >; + }; + + usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140 + MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140 + >; + }; + + usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x140 + MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x140 + >; + }; + + vbus1_pins: pinctrl-vbus-1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x20 + >; + }; + + vbus2_pins: pinctrl-vbus-2-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x20 + >; + }; + + vmmc_pins: pinctrl-vmmc-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; + + vmpcie_pins: pinctrl-vmpcie-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x0 + >; + }; +}; + +&phy0 { + leds { + #address-cells = <1>; + #size-cells = <0>; + + /* ADIN1300 LED_0 pin */ + led@0 { + reg = <0>; + color = <LED_COLOR_ID_ORANGE>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + /* ADIN1300 LINK_ST pin */ + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* mikrobus uart */ +&uart3 { + status = "okay"; +}; + +&usb3_phy0 { + fsl,phy-tx-preemp-amp-tune-microamp = <1200>; + vbus-supply = <&vbus2>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <&vbus1>; + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_hub_pins>; + + hub_2_0: hub@1 { + compatible = "usb4b4,6502", "usb4b4,6506"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <&v_1_2>; + vdd2-supply = <&v_3_3>; + }; + + hub_3_0: hub@2 { + compatible = "usb4b4,6500", "usb4b4,6504"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <&v_1_2>; + vdd2-supply = <&v_3_3>; + }; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&usdhc2_pins>; + pinctrl-1 = <&usdhc2_100mhz_pins>; + pinctrl-2 = <&usdhc2_200mhz_pins>; + vmmc-supply = <&vmmc>; + bus-width = <4>; + cap-power-off-card; + full-pwr-cycle; + status = "okay"; +}; |