diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 540 |
1 files changed, 540 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts new file mode 100644 index 000000000000..9687b4ded8f4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -0,0 +1,540 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; + +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/thermal/thermal.h> +#include "imx8mp-phycore-som.dtsi" + +/ { + model = "PHYTEC phyBOARD-Pollux i.MX8MP"; + compatible = "phytec,imx8mp-phyboard-pollux-rdk", + "phytec,imx8mp-phycore-som", "fsl,imx8mp"; + + chosen { + stdout-path = &uart1; + }; + + backlight_lvds1: backlight1 { + compatible = "pwm-backlight"; + pinctrl-0 = <&pinctrl_lvds1>; + pinctrl-names = "default"; + power-supply = <®_lvds1_reg_en>; + status = "disabled"; + }; + + fan0: fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan>; + gpio-fan,speed-map = <0 0 + 13000 1>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + #cooling-cells = <2>; + }; + + panel_lvds1: panel-lvds1 { + /* compatible panel in overlay */ + backlight = <&backlight_lvds1>; + power-supply = <®_vcc_3v3_sw>; + status = "disabled"; + + port { + panel1_in: endpoint { + remote-endpoint = <&ldb_lvds_ch1>; + }; + }; + }; + + reg_vcc_5v_sw: regulator-vcc-5v-sw { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "VCC_5V_SW"; + }; + + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_reg>; + gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can1-stby"; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + gpio = <&gpio3 21 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can2-stby"; + }; + + reg_lvds1_reg_en: regulator-lvds1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "lvds1_reg_en"; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + gpio = <&gpio1 12 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb1_host_vbus"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; + + reg_vcc_3v3_sw: regulator-vcc-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + thermal-zones { + soc-thermal { + trips { + active1: trip2 { + temperature = <60000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&active1>; + cooling-device = <&fan0 1 THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +/* TPM */ +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + tpm: tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <38000000>; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + enet-phy-lane-no-swap; + }; + }; +}; + +/* CAN FD */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + vcc-supply = <®_vcc_3v3_sw>; + }; + + leds@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-1 { + type = <PCA9532_TYPE_LED>; + }; + + led-2 { + type = <PCA9532_TYPE_LED>; + }; + + led-3 { + type = <PCA9532_TYPE_LED>; + }; + }; +}; + +&ldb_lvds_ch1 { + remote-endpoint = <&panel1_in>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&pcie_phy { + clocks = <&hsio_blk_ctrl>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,clkreq-unsupported; + status = "okay"; +}; + +/* Mini PCIe */ +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_vcc_3v3_sw>; + status = "okay"; +}; + +&pwm3 { + pinctrl-0 = <&pinctrl_pwm3>; + pinctrl-names = "default"; +}; + +&rv3028 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + aux-voltage-chargeable = <1>; + wakeup-source; + trickle-resistor-ohms = <3000>; +}; + +/* debug console */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* USB1 Host mode Type-A */ +&usb3_phy0 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +/* USB2 4-port USB3.0 HUB */ +&usb3_phy1 { + vbus-supply = <®_vcc_5v_sw>; + status = "okay"; +}; + +&usb3_1 { + fsl,permanently-attached; + fsl,disable-port-power-control; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* RS232/RS485 */ +&uart2 { + assigned-clocks = <&clk IMX8MP_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +/* SD-Card */ +&usdhc2 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <&ldo5>; + bus-width = <4>; + status = "okay"; +}; + +&gpio1 { + gpio-line-names = "", "", "X_PMIC_WDOG_B", "", + "PMIC_SD_VSEL", "", "", "", "PCIe_nPERST", "LVDS1REG_EN", + "PCIe_nWAKE", "PCIe_nCLKREQ", "USB1_OTG_PWR", "", + "PCIe_nW_DISABLE"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "X_SD2_CD_B", "", "", "", + "", "", "", "SD2_RESET_B", "LVDS1_BL_EN"; +}; + +&gpio3 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "nCAN1_EN", "nCAN2_EN"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "", "", + "", "", "X_PMIC_IRQ_B", "nRTC_INT", "nENET0_INT_PWDN"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "X_ECSPI1_SSO"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x80 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x80 + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x80 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x00 + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x12 + MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10 + >; + }; + + pinctrl_fan: fan0grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x16 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 + >; + }; + + pinctrl_flexcan1_reg: flexcan1reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x154 + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x154 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e2 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e2 + >; + }; + + pinctrl_lvds1: lvds1grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x12 + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x60 + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x60 /* open drain, pull up */ + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x40 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x12 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x1C0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + >; + }; + + pinctrl_usb1_vbus: usb1vbusgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x10 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 + MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x140 + MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x140 + >; + }; + + pinctrl_usdhc2_pins: usdhc2-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 + >; + }; +}; |