diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 150 |
1 files changed, 120 insertions, 30 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 00a240484c25..9687b4ded8f4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -1,13 +1,13 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2020 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> */ /dts-v1/; +#include <dt-bindings/phy/phy-imx8-pcie.h> #include <dt-bindings/leds/leds-pca9532.h> -#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/thermal/thermal.h> #include "imx8mp-phycore-som.dtsi" / { @@ -19,22 +19,29 @@ stdout-path = &uart1; }; - backlight_lvds: backlight { + backlight_lvds1: backlight1 { compatible = "pwm-backlight"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lvds1>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <11>; - enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; - num-interpolated-steps = <2>; + pinctrl-names = "default"; power-supply = <®_lvds1_reg_en>; - pwms = <&pwm3 0 50000 0>; + status = "disabled"; }; - panel1_lvds: panel-lvds { - compatible = "edt,etml1010g3dra"; - backlight = <&backlight_lvds>; + fan0: fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan>; + gpio-fan,speed-map = <0 0 + 13000 1>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + #cooling-cells = <2>; + }; + + panel_lvds1: panel-lvds1 { + /* compatible panel in overlay */ + backlight = <&backlight_lvds1>; power-supply = <®_vcc_3v3_sw>; + status = "disabled"; port { panel1_in: endpoint { @@ -43,6 +50,15 @@ }; }; + reg_vcc_5v_sw: regulator-vcc-5v-sw { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "VCC_5V_SW"; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -101,6 +117,41 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + thermal-zones { + soc-thermal { + trips { + active1: trip2 { + temperature = <60000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&active1>; + cooling-device = <&fan0 1 THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +/* TPM */ +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + tpm: tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <38000000>; + }; }; &eqos { @@ -155,6 +206,7 @@ compatible = "atmel,24c02"; reg = <0x51>; pagesize = <16>; + vcc-supply = <®_vcc_3v3_sw>; }; leds@62 { @@ -175,30 +227,34 @@ }; }; -&lcdif2 { - status = "okay"; +&ldb_lvds_ch1 { + remote-endpoint = <&panel1_in>; }; -&lvds_bridge { +&snvs_pwrkey { status = "okay"; +}; - ports { - port@2 { - ldb_lvds_ch1: endpoint { - remote-endpoint = <&panel1_in>; - }; - }; - }; +&pcie_phy { + clocks = <&hsio_blk_ctrl>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,clkreq-unsupported; + status = "okay"; }; -&snvs_pwrkey { +/* Mini PCIe */ +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_vcc_3v3_sw>; status = "okay"; }; &pwm3 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; + pinctrl-names = "default"; }; &rv3028 { @@ -206,6 +262,7 @@ pinctrl-0 = <&pinctrl_rtc>; interrupt-parent = <&gpio4>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + aux-voltage-chargeable = <1>; wakeup-source; trickle-resistor-ohms = <3000>; }; @@ -234,6 +291,7 @@ /* USB2 4-port USB3.0 HUB */ &usb3_phy1 { + vbus-supply = <®_vcc_5v_sw>; status = "okay"; }; @@ -267,22 +325,25 @@ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <&ldo5>; bus-width = <4>; status = "okay"; }; &gpio1 { gpio-line-names = "", "", "X_PMIC_WDOG_B", "", - "PMIC_SD_VSEL", "", "", "", "", "", - "", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT"; + "PMIC_SD_VSEL", "", "", "", "PCIe_nPERST", "LVDS1REG_EN", + "PCIe_nWAKE", "PCIe_nCLKREQ", "USB1_OTG_PWR", "", + "PCIe_nW_DISABLE"; }; &gpio2 { gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "", "X_SD2_CD_B", "", "", "", - "", "", "", "SD2_RESET_B"; + "", "", "", "SD2_RESET_B", "LVDS1_BL_EN"; }; &gpio3 { @@ -296,10 +357,24 @@ gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN"; + "", "", "X_PMIC_IRQ_B", "nRTC_INT", "nENET0_INT_PWDN"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "X_ECSPI1_SSO"; }; &iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x80 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x80 + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x80 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x00 + >; + }; + pinctrl_eqos: eqosgrp { fsl,pins = < MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 @@ -320,6 +395,12 @@ >; }; + pinctrl_fan: fan0grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x16 + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154 @@ -366,6 +447,15 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x60 + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x60 /* open drain, pull up */ + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x40 + >; + }; + pinctrl_pwm3: pwm3grp { fsl,pins = < MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x12 |