diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi | 59 |
1 files changed, 58 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi index a509b2b7fa85..a38e7c947a42 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi @@ -4,6 +4,18 @@ */ / { + native-hdmi-connector { + compatible = "hdmi-connector"; + label = "X37"; + type = "a"; + + port { + native_hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + reg_eth2phy: regulator-eth2phy { compatible = "regulator-fixed"; enable-active-high; @@ -22,7 +34,7 @@ simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&codec_dai>; simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "imx8mp-nau8822"; + simple-audio-card,name = "verdin-nau8822"; simple-audio-card,routing = "Headphones", "LHP", "Headphones", "RHP", @@ -52,6 +64,11 @@ }; }; +/* Verdin HDMI_1 Audio */ +&aud2htx { + status = "okay"; +}; + &backlight { power-supply = <®_3p3v>; }; @@ -93,11 +110,37 @@ status = "okay"; }; +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; +}; + &gpio_expander_21 { status = "okay"; vcc-supply = <®_1p8v>; }; +/* Verdin HDMI_1 */ +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&native_hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + /* Current measurement into module VCC */ &hwmon { status = "okay"; @@ -131,6 +174,15 @@ }; }; +/* Verdin I2C_3_HDMI */ +&i2c5 { + status = "okay"; +}; + +&lcdif3 { + status = "okay"; +}; + /* Verdin PCIE_1 */ &pcie { status = "okay"; @@ -168,6 +220,11 @@ status = "okay"; }; +/* Verdin HDMI_1 Audio */ +&sound_hdmi { + status = "okay"; +}; + /* Verdin UART_1, connector X50 through RS485 transceiver */ &uart1 { linux,rs485-enabled-at-boot-time; |