diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/mba8mx.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/mba8mx.dtsi | 29 |
1 files changed, 11 insertions, 18 deletions
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 427467df42bf..7ee1228a50f4 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -100,7 +100,6 @@ port { panel_in_lvds: endpoint { - data-lanes = <1 2 3 4>; remote-endpoint = <&lvds_bridge_out>; }; }; @@ -139,7 +138,7 @@ sound { compatible = "fsl,imx-audio-tlv320aic32x4"; - model = "imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; ssi-controller = <&sai3>; audio-codec = <&tlv320aic3x04>; }; @@ -185,6 +184,8 @@ reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>; reset-assert-us = <500000>; reset-deassert-us = <500>; + interrupt-parent = <&expander2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; }; }; }; @@ -237,7 +238,6 @@ }; &i2c2 { - clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -258,6 +258,11 @@ reg = <0x1f>; }; + /* + * TUSB8041 is at 0x41, but not connected by default + * Note: TUSB8041 only supports 100 kHz! + */ + eeprom3: eeprom@57 { compatible = "nxp,se97b", "atmel,24c02"; reg = <0x57>; @@ -274,7 +279,6 @@ }; &i2c3 { - clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_gpio>; @@ -313,20 +317,9 @@ }; }; -&mipi_dsi { - samsung,burst-clock-frequency = <891000000>; - samsung,esc-clock-frequency = <20000000>; - - ports { - port@1 { - reg = <1>; - - mipi_dsi_out: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&lvds_bridge_in>; - }; - }; - }; +&mipi_dsi_out { + data-lanes = <1 2 3 4>; + remote-endpoint = <&lvds_bridge_in>; }; &pwm3 { |