diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts | 57 |
1 files changed, 56 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts index e05ee854cdf5..ee3121b192e5 100644 --- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts @@ -1,18 +1,20 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (c) 2021 SUSE LLC - * Copyright (c) 2019-2021 NXP + * Copyright 2019-2021, 2024 NXP */ /dts-v1/; #include "s32g2.dtsi" +#include "s32gxxxa-rdb.dtsi" / { model = "NXP S32G2 Reference Design Board 2 (S32G-VNP-RDB2)"; compatible = "nxp,s32g274a-rdb2", "nxp,s32g2"; aliases { + ethernet0 = &gmac0; serial0 = &uart0; serial1 = &uart1; }; @@ -38,3 +40,56 @@ &uart1 { status = "okay"; }; + +&stm0 { + status = "okay"; +}; + +&stm1 { + status = "okay"; +}; + +&stm2 { + status = "okay"; +}; + +&stm3 { + status = "okay"; +}; + +&swt0 { + status = "okay"; +}; + +&usdhc0 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0_100mhz>; + pinctrl-2 = <&pinctrl_usdhc0_200mhz>; + disable-wp; + /* Remove no-1-8-v to enable higher speed modes for SD card. + * However, this is not enough to enable HS400 or HS200 modes for eMMC. + * In this case, the position of the resistor R797 must be changed + * from A to B before removing the property. + * If the property is removed without changing the resistor position, + * HS*00 may be enabled, but the interface might be unstable because of + * the wrong VCCQ voltage applied to the eMMC. + */ + no-1-8-v; + status = "okay"; +}; + +&gmac0 { + clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>; + clock-names = "stmmaceth", "tx", "rx", "ptp_ref"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmiiaphy1>; + status = "okay"; +}; + +&gmac0mdio { + /* KSZ 9031 on RGMII */ + rgmiiaphy1: ethernet-phy@1 { + reg = <1>; + }; +}; |