1 files changed, 18 insertions, 15 deletions

diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 7d369fdd3117..0449686bd06b 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -11,6 +11,7 @@
 
 / {
 	model = "MediaTek MT2712 evaluation board";
+	chassis-type = "embedded";
 	compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
 
 	aliases {
@@ -26,14 +27,14 @@
 		stdout-path = "serial0:921600n8";
 	};
 
-	cpus_fixed_vproc0: fixedregulator@0 {
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck0";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
 	};
 
-	cpus_fixed_vproc1: fixedregulator@1 {
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vproc_buck1";
 		regulator-min-microvolt = <1000000>;
@@ -42,15 +43,15 @@
 
 	extcon_usb: extcon_iddig {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb1: extcon_iddig1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p0_vbus: regulator@2 {
+	usb_p0_vbus: regulator-usb-p0-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p0_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -59,7 +60,7 @@
 		enable-active-high;
 	};
 
-	usb_p1_vbus: regulator@3 {
+	usb_p1_vbus: regulator-usb-p1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +69,7 @@
 		enable-active-high;
 	};
 
-	usb_p2_vbus: regulator@4 {
+	usb_p2_vbus: regulator-usb-p2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +78,7 @@
 		enable-active-high;
 	};
 
-	usb_p3_vbus: regulator@5 {
+	usb_p3_vbus: regulator-usb-p3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "p3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -106,13 +107,15 @@
 };
 
 &eth {
-	phy-mode ="rgmii-rxid";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethernet_phy0>;
 	mediatek,tx-delay-ps = <1530>;
 	snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+	snps,reset-delays-us = <0 10000 10000>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth_default>;
 	pinctrl-1 = <&eth_sleep>;
+	mediatek,mac-wol;
 	status = "okay";
 
 	mdio {
@@ -127,7 +130,7 @@
 };
 
 &pio {
-	eth_default: eth_default {
+	eth_default: eth-default-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
@@ -135,7 +138,7 @@
 				 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
 				 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
 				 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 		rx_pins {
 			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
@@ -149,12 +152,12 @@
 		mdio_pins {
 			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
 				 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			input-enable;
 		};
 	};
 
-	eth_sleep: eth_sleep {
+	eth_sleep: eth-sleep-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
@@ -180,14 +183,14 @@
 		};
 	};
 
-	usb0_id_pins_float: usb0_iddig {
+	usb0_id_pins_float: usb0-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
 			bias-pull-up;
 		};
 	};
 
-	usb1_id_pins_float: usb1_iddig {
+	usb1_id_pins_float: usb1-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
 			bias-pull-up;