diff options
Diffstat (limited to 'arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts')
| -rw-r--r-- | arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 34 |
1 files changed, 23 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 86cedb0bf1a9..9f100b18a676 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -73,8 +73,9 @@ }; }; - memory { + memory@40000000 { reg = <0 0x40000000 0 0x40000000>; + device_type = "memory"; }; reg_1p8v: regulator-1p8v { @@ -148,13 +149,12 @@ #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7531"; - reg = <0>; + reg = <0x1f>; interrupt-controller; #interrupt-cells = <1>; - interrupt-parent = <&pio>; - interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&pio 54 0>; ports { @@ -186,6 +186,18 @@ label = "lan3"; }; + port@5 { + reg = <5>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + port@6 { reg = <6>; label = "cpu"; @@ -308,7 +320,7 @@ /* Attention: GPIO 90 is used to switch between PCIe@1,0 and * SATA functions. i.e. output-high: PCIe, output-low: SATA */ - asm_sel { + asm-sel-hog { gpio-hog; gpios = <90 GPIO_ACTIVE_HIGH>; output-high; @@ -317,8 +329,8 @@ /* eMMC is shared pin with parallel NAND */ emmc_pins_default: emmc-pins-default { mux { - function = "emmc", "emmc_rst"; - groups = "emmc"; + function = "emmc"; + groups = "emmc", "emmc_rst"; }; /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", @@ -385,9 +397,9 @@ i2s1_pins: i2s1-pins { mux { function = "i2s"; - groups = "i2s_out_mclk_bclk_ws", - "i2s1_in_data", - "i2s1_out_data"; + groups = "i2s_out_mclk_bclk_ws", + "i2s1_in_data", + "i2s1_out_data"; }; conf { |