diff options
Diffstat (limited to 'arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi | 427 |
1 files changed, 427 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi new file mode 100644 index 000000000000..a8e79c2791ba --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola.dtsi" + +/ { + en_pp6000_mipi_disp_150ma: en-pp6000-mipi-disp-150ma { + compatible = "regulator-fixed"; + regulator-name = "en_pp6000_mipi_disp_150ma"; + gpio = <&pio 154 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp6000_mipi_disp_150ma_fixed_pins>; + }; + + /* + * Starmie does not have 3.3V display regulator. It is replaced + * with 6V module for enabling panel, re-using eDP GPIOs. + */ + /delete-node/ pp3300_disp_x; + en_pp6000_mipi_disp: en-regulator-pp6000-mipi-disp { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_fixed_pins>; + gpios = <&pio 153 GPIO_ACTIVE_HIGH>; + regulator-name = "en_pp6000_mipi_disp"; + enable-active-high; + regulator-enable-ramp-delay = <3000>; + vin-supply = <&pp3300_z2>; + }; + + tboard_thermistor1: thermal-sensor1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-5000) 1492 + 0 1413 + 5000 1324 + 10000 1227 + 15000 1121 + 20000 1017 + 25000 900 + 30000 797 + 35000 698 + 40000 606 + 45000 522 + 50000 449 + 55000 383 + 60000 327 + 65000 278 + 70000 236 + 75000 201 + 80000 171 + 85000 145 + 90000 163 + 95000 124 + 100000 91 + 105000 78 + 110000 67 + 115000 58 + 120000 50 + 125000 44>; + }; + + tboard_thermistor2: thermal-sensor2 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-5000) 1492 + 0 1413 + 5000 1324 + 10000 1227 + 15000 1121 + 20000 1017 + 25000 900 + 30000 797 + 35000 698 + 40000 606 + 45000 522 + 50000 449 + 55000 383 + 60000 327 + 65000 278 + 70000 236 + 75000 201 + 80000 171 + 85000 145 + 90000 163 + 95000 124 + 100000 91 + 105000 78 + 110000 67 + 115000 58 + 120000 50 + 125000 44>; + }; +}; + +/* + * Starmie does not have EC keyboard. Remove default keyboard controller + * and replace it with the driver for side switches. + */ +/delete-node/ &keyboard_controller; + +&cros_ec { + cbas: cbas { + compatible = "google,cros-cbas"; + }; + + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + #address-cells = <1>; + #size-cells = <0>; + panel: panel@0 { + /* compatible will be set in board dts */ + reg = <0>; + enable-gpios = <&pio 98 0>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_pins>; + avdd-supply = <&en_pp6000_mipi_disp>; + avee-supply = <&en_pp6000_mipi_disp_150ma>; + pp1800-supply = <&mt6366_vio18_reg>; + backlight = <&backlight_lcd0>; + rotation = <270>; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_out { + remote-endpoint = <&panel_in>; +}; + +&i2c0 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c4 { + status = "disabled"; +}; + +&i2c5 { + clock-frequency = <400000>; +}; + +&mmc1_pins_default { + pins-clk { + drive-strength = <8>; + }; + + pins-cmd-dat { + drive-strength = <8>; + }; +}; + +&mmc1_pins_uhs { + pins-clk { + drive-strength = <8>; + }; + + pins-cmd-dat { + drive-strength = <8>; + }; +}; + +&pen_insert { + wakeup-event-action = <EV_ACT_ANY>; +}; + +&pio { + /* 185 lines */ + gpio-line-names = "TP", + "TP", + "TP", + "I2S0_HP_DI", + "I2S3_DP_SPKR_DO", + "SAR_INT_ODL", + "BT_WAKE_AP_ODL", + "WIFI_INT_ODL", + "DPBRDG_INT_ODL", + "NC", + "EC_AP_HPD_OD", + "NC", + "TCHSCR_INT_1V8_ODL", + "EC_AP_INT_ODL", + "EC_IN_RW_ODL", + "GSC_AP_INT_ODL", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it AP_WP_ODL. + */ + "AP_FLASH_WP_L", + "HP_INT_ODL", + "PEN_EJECT_OD", + "NC", + "NC", + "UCAM_SEN_EN", + "NC", + "NC", + "NC", + "I2S2_DP_SPK_MCK", + "I2S2_DP_SPKR_BCK", + "I2S2_DP_SPKR_LRCK", + "NC", + "NC", + "NC", + "NC", + "UART_GSC_TX_AP_RX", + "UART_AP_TX_GSC_RX", + "UART_DBGCON_TX_ADSP_RX", + "UART_ADSP_TX_DBGCON_RX", + "NC", + "TCHSCR_REPORT_DISABLE", + "NC", + "EN_PP1800_DPBRDG", + "SPI_AP_CLK_EC", + "SPI_AP_CS_EC_L", + "SPI_AP_DO_EC_DI", + "SPI_AP_DI_EC_DO", + "SPI_AP_CLK_GSC", + "SPI_AP_CS_GSC_L", + "SPI_AP_DO_GSC_DI", + "SPI_AP_DI_GSC_DO", + "UART_DBGCON_TX_SCP_RX", + "UART_SCP_TX_DBGCON_RX", + "EN_PP1200_CAM_X", + "WLAN_MODULE_RST_L", + "NC", + "NC", + "NC", + "NC", + "I2S1_HP_DO", + "I2S1_HP_BCK", + "I2S1_HP_LRCK", + "I2S1_HP_MCK", + "TCHSCR_RST_1V8_L", + "SPI_AP_CLK_ROM", + "SPI_AP_CS_ROM_L", + "SPI_AP_DO_ROM_DI", + "SPI_AP_DI_ROM_DO", + "NC", + "NC", + "EMMC_STRB", + "EMMC_CLK", + "EMMC_CMD", + "EMMC_RST_L", + "EMMC_DATA0", + "EMMC_DATA1", + "EMMC_DATA2", + "EMMC_DATA3", + "EMMC_DATA4", + "EMMC_DATA5", + "EMMC_DATA6", + "EMMC_DATA7", + "AP_KPCOL0", + "NC", + "NC", + "NC", + "TP", + "SDIO_CLK", + "SDIO_CMD", + "SDIO_DATA0", + "SDIO_DATA1", + "SDIO_DATA2", + "SDIO_DATA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "MIPI_BL_PWM_1V8", + "DISP_RST_1V8_L", + "MIPI_DPI_CLK", + "MIPI_DPI_VSYNC", + "MIPI_DPI_HSYNC", + "MIPI_DPI_DE", + "MIPI_DPI_D0", + "MIPI_DPI_D1", + "MIPI_DPI_D2", + "MIPI_DPI_D3", + "MIPI_DPI_D4", + "MIPI_DPI_D5", + "MIPI_DPI_D6", + "MIPI_DPI_DA7", + "MIPI_DPI_D8", + "MIPI_DPI_D9", + "MIPI_DPI_D10", + "MIPI_DPI_D11", + "PCM_BT_CLK", + "PCM_BT_SYNC", + "PCM_BT_DI", + "PCM_BT_DO", + "JTAG_TMS_TP", + "JTAG_TCK_TP", + "JTAG_TDI_TP", + "JTAG_TDO_TP", + "JTAG_TRSTN_TP", + "NC", + "NC", + "UCAM_DET_ODL", + "NC", + "NC", + "AP_I2C_TCHSCR_SCL_1V8", + "AP_I2C_TCHSCR_SDA_1V8", + "NC", + "NC", + "AP_I2C_DPBRDG_SCL_1V8", + "AP_I2C_DPBRDG_SDA_1V8", + "NC", + "NC", + "AP_I2C_AUD_SCL_1V8", + "AP_I2C_AUD_SDA_1V8", + "AP_I2C_DISP_SCL_1V8", + "AP_I2C_DISP_SDA_1V8", + "NC", + "NC", + "NC", + "NC", + "SCP_I2C_SENSOR_SCL_1V8", + "SCP_I2C_SENSOR_SDA_1V8", + "AP_EC_WARM_RST_REQ", + "AP_XHCI_INIT_DONE", + "USB3_HUB_RST_L", + "EN_SPKR", + "BEEP_ON", + "AP_DISP_BKLTEN", + "EN_PP6000_MIPI_DISP", + "EN_PP6000_MIPI_DISP_150MA", + "BT_KILL_1V8_L", + "WIFI_KILL_1V8_L", + "PWRAP_SPI0_CSN", + "PWRAP_SPI0_CK", + "PWRAP_SPI0_MO", + "PWRAP_SPI0_MI", + "SRCLKENA0", + "SRCLKENA1", + "SCP_VREQ_VAO", + "AP_RTC_CLK32K", + "AP_PMIC_WDTRST_L", + "AUD_CLK_MOSI", + "AUD_SYNC_MOSI", + "AUD_DAT_MOSI0", + "AUD_DAT_MOSI1", + "AUD_CLK_MISO", + "AUD_SYNC_MISO", + "AUD_DAT_MISO0", + "AUD_DAT_MISO1", + "NC", + "NC", + "NC", + "DPBRDG_RST_L", + "LTE_W_DISABLE_L", + "LTE_SAR_DETECT_L", + "EN_PP3300_LTE_X", + "LTE_PWR_OFF_L", + "LTE_RESET_L", + "TP", + "TP"; + + en_pp6000_mipi_disp_150ma_fixed_pins: en_pp6000-mipi-disp-150ma-fixed-pins { + pins-en { + pinmux = <PINMUX_GPIO154__FUNC_GPIO154>; + output-low; + }; + }; + + panel_default_pins: panel-default-pins { + pins-en { + pinmux = <PINMUX_GPIO98__FUNC_GPIO98>; + output-low; + }; + }; +}; + +&usb_c1 { + status = "disabled"; +}; + +&thermal_zones { + tboard1-thermal { + polling-delay = <1000>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&tboard_thermistor1>; + }; + + tboard2-thermal { + polling-delay = <1000>; /* milliseconds */ + polling-delay-passive = <0>; /* milliseconds */ + thermal-sensors = <&tboard_thermistor2>; + }; +}; + +&wifi_pwrseq { + reset-gpios = <&pio 51 1>; +}; + +/* + * Battery on Starmie is using a different address than default. + * Remove old node to reuse "battery" alias. + */ +/delete-node/ &battery; +&i2c_tunnel { + battery: sbs-battery@f { + compatible = "sbs,sbs-battery"; + reg = <0xf>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <1>; + }; +}; |