summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/ipq5018.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/ipq5018.dtsi')
-rw-r--r--arch/arm64/boot/dts/qcom/ipq5018.dtsi257
1 files changed, 249 insertions, 8 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 32b178b639f0..130360014c5e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -31,27 +31,27 @@
#address-cells = <1>;
#size-cells = <0>;
- CPU0: cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
enable-method = "psci";
- next-level-cache = <&L2_0>;
+ next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
};
- CPU1: cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
enable-method = "psci";
- next-level-cache = <&L2_0>;
+ next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
};
- L2_0: l2-cache {
+ l2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x80000>;
@@ -79,6 +79,7 @@
firmware {
scm {
compatible = "qcom,scm-ipq5018", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x6100>;
qcom,sdi-enabled;
};
};
@@ -147,6 +148,40 @@
status = "disabled";
};
+ pcie1_phy: phy@7e000 {
+ compatible = "qcom,ipq5018-uniphy-pcie-phy";
+ reg = <0x0007e000 0x800>;
+
+ clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+
+ resets = <&gcc GCC_PCIE1_PHY_BCR>,
+ <&gcc GCC_PCIE1PHY_PHY_BCR>;
+
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ num-lanes = <1>;
+
+ status = "disabled";
+ };
+
+ pcie0_phy: phy@86000 {
+ compatible = "qcom,ipq5018-uniphy-pcie-phy";
+ reg = <0x00086000 0x1000>;
+
+ clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+
+ resets = <&gcc GCC_PCIE0_PHY_BCR>,
+ <&gcc GCC_PCIE0PHY_PHY_BCR>;
+
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ num-lanes = <2>;
+
+ status = "disabled";
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5018-tlmm";
reg = <0x01000000 0x300000>;
@@ -170,8 +205,8 @@
reg = <0x01800000 0x80000>;
clocks = <&xo_board_clk>,
<&sleep_clk>,
- <0>,
- <0>,
+ <&pcie0_phy>,
+ <&pcie1_phy>,
<0>,
<0>,
<0>,
@@ -179,7 +214,6 @@
<0>;
#clock-cells = <1>;
#reset-cells = <1>;
- #power-domain-cells = <1>;
};
tcsr_mutex: hwlock@1905000 {
@@ -188,6 +222,11 @@
#hwlock-cells = <1>;
};
+ tcsr: syscon@1937000 {
+ compatible = "qcom,tcsr-ipq5018", "syscon";
+ reg = <0x01937000 0x21000>;
+ };
+
sdhc_1: mmc@7804000 {
compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
reg = <0x7804000 0x1000>;
@@ -388,6 +427,208 @@
status = "disabled";
};
};
+
+ pcie1: pcie@80000000 {
+ compatible = "qcom,pcie-ipq5018";
+ reg = <0x80000000 0xf1d>,
+ <0x80000f20 0xa8>,
+ <0x80001000 0x1000>,
+ <0x00078000 0x3000>,
+ <0x80100000 0x1000>,
+ <0x0007b000 0x1000>;
+ reg-names = "dbi",
+ "elbi",
+ "atu",
+ "parf",
+ "config",
+ "mhi";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* The controller supports Gen3, but the connected PHY is Gen2-capable */
+ max-link-speed = <2>;
+
+ phys = <&pcie1_phy>;
+ phy-names ="pciephy";
+
+ ranges = <0x01000000 0 0x00000000 0x80200000 0 0x00100000>,
+ <0x02000000 0 0x80300000 0x80300000 0 0x10000000>;
+
+ msi-map = <0x0 &v2m0 0x0 0xff8>;
+
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 143 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 144 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 145 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
+ <&gcc GCC_PCIE1_AXI_M_CLK>,
+ <&gcc GCC_PCIE1_AXI_S_CLK>,
+ <&gcc GCC_PCIE1_AHB_CLK>,
+ <&gcc GCC_PCIE1_AUX_CLK>,
+ <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>;
+ clock-names = "iface",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "aux",
+ "axi_bridge";
+
+ resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+ <&gcc GCC_PCIE1_SLEEP_ARES>,
+ <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE1_AHB_ARES>,
+ <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>,
+ <&gcc GCC_PCIE1_AXI_SLAVE_STICKY_ARES>;
+ reset-names = "pipe",
+ "sleep",
+ "sticky",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "axi_m_sticky",
+ "axi_s_sticky";
+
+ status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+ };
+
+ pcie0: pcie@a0000000 {
+ compatible = "qcom,pcie-ipq5018";
+ reg = <0xa0000000 0xf1d>,
+ <0xa0000f20 0xa8>,
+ <0xa0001000 0x1000>,
+ <0x00080000 0x3000>,
+ <0xa0100000 0x1000>,
+ <0x00083000 0x1000>;
+ reg-names = "dbi",
+ "elbi",
+ "atu",
+ "parf",
+ "config",
+ "mhi";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* The controller supports Gen3, but the connected PHY is Gen2-capable */
+ max-link-speed = <2>;
+
+ phys = <&pcie0_phy>;
+ phy-names ="pciephy";
+
+ ranges = <0x01000000 0 0x00000000 0xa0200000 0 0x00100000>,
+ <0x02000000 0 0xa0300000 0xa0300000 0 0x10000000>;
+
+ msi-map = <0x0 &v2m0 0x0 0xff8>;
+
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+ <&gcc GCC_PCIE0_AXI_M_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>,
+ <&gcc GCC_PCIE0_AUX_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>;
+ clock-names = "iface",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "aux",
+ "axi_bridge";
+
+ resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+ <&gcc GCC_PCIE0_SLEEP_ARES>,
+ <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE0_AHB_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+ reset-names = "pipe",
+ "sleep",
+ "sticky",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "axi_m_sticky",
+ "axi_s_sticky";
+
+ status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+ };
};
timer {
generated by cgit (git 2.34.1) at 2025-07-23 13:26:18 +0000