diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/ipq5018.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq5018.dtsi | 618 |
1 files changed, 606 insertions, 12 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 32b178b639f0..f024b3cba33f 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -2,13 +2,15 @@ /* * IPQ5018 SoC device tree source * - * Copyright (c) 2023 The Linux Foundation. All rights reserved. + * Copyright (c) 2023-2025 The Linux Foundation. All rights reserved. */ #include <dt-bindings/clock/qcom,apss-ipq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq5018.h> +#include <dt-bindings/clock/qcom,ipq5018-cmn-pll.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/qcom,gcc-ipq5018.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -16,14 +18,41 @@ #size-cells = <2>; clocks { + gephy_rx_clk: gephy-rx-clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + #clock-cells = <0>; + }; + + gephy_tx_clk: gephy-tx-clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + #clock-cells = <0>; + }; + + ref_96mhz_clk: ref-96mhz-clk { + compatible = "fixed-factor-clock"; + clocks = <&xo_clk>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + }; + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; }; xo_board_clk: xo-board-clk { + compatible = "fixed-factor-clock"; + clocks = <&ref_96mhz_clk>; + #clock-cells = <0>; + }; + + xo_clk: xo-clk { compatible = "fixed-clock"; #clock-cells = <0>; + clock-frequency = <48000000>; }; }; @@ -31,27 +60,29 @@ #address-cells = <1>; #size-cells = <0>; - CPU0: cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; }; - CPU1: cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; }; - L2_0: l2-cache { + l2_0: l2-cache { compatible = "cache"; cache-level = <2>; cache-size = <0x80000>; @@ -79,6 +110,7 @@ firmware { scm { compatible = "qcom,scm-ipq5018", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; qcom,sdi-enabled; }; }; @@ -147,6 +179,235 @@ status = "disabled"; }; + pcie1_phy: phy@7e000 { + compatible = "qcom,ipq5018-uniphy-pcie-phy"; + reg = <0x0007e000 0x800>; + + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + + #clock-cells = <0>; + #phy-cells = <0>; + + num-lanes = <1>; + + status = "disabled"; + }; + + pcie0_phy: phy@86000 { + compatible = "qcom,ipq5018-uniphy-pcie-phy"; + reg = <0x00086000 0x1000>; + + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + + #clock-cells = <0>; + #phy-cells = <0>; + + num-lanes = <2>; + + status = "disabled"; + }; + + mdio0: mdio@88000 { + compatible = "qcom,ipq5018-mdio"; + reg = <0x00088000 0x64>, + <0x019475c4 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&gcc GCC_MDIO0_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + + status = "disabled"; + + ge_phy: ethernet-phy@7 { + compatible = "ethernet-phy-id004d.d0c0"; + reg = <7>; + + resets = <&gcc GCC_GEPHY_MISC_ARES>; + }; + }; + + mdio1: mdio@90000 { + compatible = "qcom,ipq5018-mdio"; + reg = <0x00090000 0x64>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&gcc GCC_MDIO1_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + + status = "disabled"; + }; + + cmn_pll: clock-controller@9b000 { + compatible = "qcom,ipq5018-cmn-pll"; + reg = <0x0009b000 0x800>; + clocks = <&ref_96mhz_clk>, + <&gcc GCC_CMN_BLK_AHB_CLK>, + <&gcc GCC_CMN_BLK_SYS_CLK>; + clock-names = "ref", + "ahb", + "sys"; + #clock-cells = <1>; + assigned-clocks = <&cmn_pll IPQ5018_CMN_PLL_CLK>; + assigned-clock-rates-u64 = /bits/ 64 <9600000000>; + }; + + qfprom: qfprom@a0000 { + compatible = "qcom,ipq5018-qfprom", "qcom,qfprom"; + reg = <0x000a0000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_mode: mode@249 { + reg = <0x249 0x1>; + bits = <0 3>; + }; + + tsens_base1: base1@249 { + reg = <0x249 0x2>; + bits = <3 8>; + }; + + tsens_base2: base2@24a { + reg = <0x24a 0x2>; + bits = <3 8>; + }; + + tsens_s0_p1: s0-p1@24b { + reg = <0x24b 0x2>; + bits = <2 6>; + }; + + tsens_s0_p2: s0-p2@24c { + reg = <0x24c 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@24c { + reg = <0x24c 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@24d { + reg = <0x24d 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@24e { + reg = <0x24e 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@24f { + reg = <0x24f 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@24f { + reg = <0x24f 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@250 { + reg = <0x250 0x2>; + bits = <5 6>; + }; + + tsens_s4_p1: s4-p1@251 { + reg = <0x251 0x2>; + bits = <3 6>; + }; + + tsens_s4_p2: s4-p2@254 { + reg = <0x254 0x1>; + bits = <0 6>; + }; + }; + + prng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + status = "disabled"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, + <0x004a8000 0x1000>; + + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, + <&tsens_base2>, + <&tsens_s0_p1>, + <&tsens_s0_p2>, + <&tsens_s1_p1>, + <&tsens_s1_p2>, + <&tsens_s2_p1>, + <&tsens_s2_p2>, + <&tsens_s3_p1>, + <&tsens_s3_p2>, + <&tsens_s4_p1>, + <&tsens_s4_p2>; + + nvmem-cell-names = "mode", + "base1", + "base2", + "s0_p1", + "s0_p2", + "s1_p1", + "s1_p2", + "s2_p1", + "s2_p2", + "s3_p1", + "s3_p2", + "s4_p1", + "s4_p2"; + + interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "uplow"; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + }; + + crypto: crypto@73a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x0073a000 0x6000>; + + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", + "bus", + "core"; + + dmas = <&cryptobam 2>, + <&cryptobam 3>; + dma-names = "rx", + "tx"; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5018-tlmm"; reg = <0x01000000 0x300000>; @@ -170,16 +431,15 @@ reg = <0x01800000 0x80000>; clocks = <&xo_board_clk>, <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, <0>, - <0>, - <0>, - <0>, - <0>, + <&gephy_rx_clk>, + <&gephy_tx_clk>, <0>, <0>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; }; tcsr_mutex: hwlock@1905000 { @@ -188,6 +448,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq5018", "syscon"; + reg = <0x01937000 0x21000>; + }; + sdhc_1: mmc@7804000 { compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5"; reg = <0x7804000 0x1000>; @@ -225,6 +490,16 @@ status = "disabled"; }; + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; @@ -239,6 +514,59 @@ status = "disabled"; }; + blsp1_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 9>, <&blsp_dma 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + qpic_bam: dma-controller@7984000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x07984000 0x1c000>; + + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + + #dma-cells = <1>; + qcom,ee = <0>; + + status = "disabled"; + }; + + qpic_nand: spi@79b0000 { + compatible = "qcom,ipq5018-snand", "qcom,ipq9574-snand"; + reg = <0x079b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>, + <&gcc GCC_QPIC_IO_MACRO_CLK>; + clock-names = "core", + "aon", + "iom"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", + "rx", + "cmd"; + + status = "disabled"; + }; + usb: usb@8af8800 { compatible = "qcom,ipq5018-dwc3", "qcom,dwc3"; reg = <0x08af8800 0x400>; @@ -388,6 +716,272 @@ status = "disabled"; }; }; + + pcie1: pcie@80000000 { + compatible = "qcom,pcie-ipq5018"; + reg = <0x80000000 0xf1d>, + <0x80000f20 0xa8>, + <0x80001000 0x1000>, + <0x00078000 0x3000>, + <0x80100000 0x1000>, + <0x0007b000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + /* The controller supports Gen3, but the connected PHY is Gen2-capable */ + max-link-speed = <2>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + ranges = <0x01000000 0 0x00000000 0x80200000 0 0x00100000>, + <0x02000000 0 0x80300000 0x80300000 0 0x10000000>; + + msi-map = <0x0 &v2m0 0x0 0xff8>; + + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, + <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux", + "axi_bridge"; + + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_SLEEP_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie0: pcie@a0000000 { + compatible = "qcom,pcie-ipq5018"; + reg = <0xa0000000 0xf1d>, + <0xa0000f20 0xa8>, + <0xa0001000 0x1000>, + <0x00080000 0x3000>, + <0xa0100000 0x1000>, + <0x00083000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + + /* The controller supports Gen3, but the connected PHY is Gen2-capable */ + max-link-speed = <2>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + ranges = <0x01000000 0 0x00000000 0xa0200000 0 0x00100000>, + <0x02000000 0 0xa0300000 0xa0300000 0 0x10000000>; + + msi-map = <0x0 &v2m0 0x0 0xff8>; + + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux", + "axi_bridge"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; + + thermal-zones { + cpu-thermal { + thermal-sensors = <&tsens 2>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + + cpu_alert: cpu-passive { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gephy-thermal { + thermal-sensors = <&tsens 4>; + + trips { + gephy-critical { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + top-glue-thermal { + thermal-sensors = <&tsens 3>; + + trips { + top-glue-critical { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi32-thermal { + thermal-sensors = <&tsens 1>; + + trips { + ubi32-critical { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; }; timer { |