diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/ipq5332.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq5332.dtsi | 495 |
1 files changed, 476 insertions, 19 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 8bfc2db44624..45fc512a3bab 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/clock/qcom,ipq5332-gcc.h> +#include <dt-bindings/interconnect/qcom,ipq5332.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -30,47 +31,47 @@ #address-cells = <1>; #size-cells = <0>; - CPU0: cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; operating-points-v2 = <&cpu_opp_table>; }; - CPU1: cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; operating-points-v2 = <&cpu_opp_table>; }; - CPU2: cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; operating-points-v2 = <&cpu_opp_table>; }; - CPU3: cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; operating-points-v2 = <&cpu_opp_table>; }; - L2_0: l2-cache { + l2_0: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -91,11 +92,19 @@ }; cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; + compatible = "operating-points-v2-kryo-cpu"; opp-shared; + nvmem-cells = <&cpu_speed_bin>; - opp-1488000000 { - opp-hz = /bits/ 64 <1488000000>; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-supported-hw = <0x3>; clock-latency-ns = <200000>; }; }; @@ -135,7 +144,7 @@ reg = <0x0 0x4a800000 0x0 0x100000>; no-map; - hwlocks = <&tcsr_mutex 0>; + hwlocks = <&tcsr_mutex 3>; }; }; @@ -145,20 +154,144 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + usbphy0: phy@7b000 { + compatible = "qcom,ipq5332-usb-hsphy"; + reg = <0x0007b000 0x12c>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + qfprom: efuse@a4000 { compatible = "qcom,ipq5332-qfprom", "qcom,qfprom"; reg = <0x000a4000 0x721>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_bin: cpu-speed-bin@1d { + reg = <0x1d 0x2>; + bits = <7 2>; + }; + + tsens_sens11_off: s11@3a5 { + reg = <0x3a5 0x1>; + bits = <4 4>; + }; + + tsens_sens12_off: s12@3a6 { + reg = <0x3a6 0x1>; + bits = <0 4>; + }; + + tsens_sens13_off: s13@3a6 { + reg = <0x3a6 0x1>; + bits = <4 4>; + }; + + tsens_sens14_off: s14@3ad { + reg = <0x3ad 0x2>; + bits = <7 4>; + }; + + tsens_sens15_off: s15@3ae { + reg = <0x3ae 0x1>; + bits = <3 4>; + }; + + tsens_mode: mode@3e1 { + reg = <0x3e1 0x1>; + bits = <0 3>; + }; + + tsens_base0: base0@3e1 { + reg = <0x3e1 0x2>; + bits = <3 10>; + }; + + tsens_base1: base1@3e2 { + reg = <0x3e2 0x2>; + bits = <5 10>; + }; }; rng: rng@e3000 { - compatible = "qcom,prng-ee"; + compatible = "qcom,ipq5332-trng", "qcom,trng"; reg = <0x000e3000 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq5332-tsens"; + reg = <0x004a9000 0x1000>, + <0x004a8000 0x1000>; + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + nvmem-cells = <&tsens_mode>, + <&tsens_base0>, + <&tsens_base1>, + <&tsens_sens11_off>, + <&tsens_sens12_off>, + <&tsens_sens13_off>, + <&tsens_sens14_off>, + <&tsens_sens15_off>; + nvmem-cell-names = "mode", + "base0", + "base1", + "tsens_sens11_off", + "tsens_sens12_off", + "tsens_sens13_off", + "tsens_sens14_off", + "tsens_sens15_off"; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + + pcie0_phy: phy@4b0000 { + compatible = "qcom,ipq5332-uniphy-pcie-phy"; + reg = <0x004b0000 0x800>; + + clocks = <&gcc GCC_PCIE3X1_0_PIPE_CLK>, + <&gcc GCC_PCIE3X1_PHY_AHB_CLK>; + + resets = <&gcc GCC_PCIE3X1_0_PHY_BCR>, + <&gcc GCC_PCIE3X1_PHY_AHB_CLK_ARES>, + <&gcc GCC_PCIE3X1_0_PHY_PHY_BCR>; + + #clock-cells = <0>; + + #phy-cells = <0>; + + num-lanes = <1>; + + status = "disabled"; + }; + + pcie1_phy: phy@4b1000 { + compatible = "qcom,ipq5332-uniphy-pcie-phy"; + reg = <0x004b1000 0x1000>; + + clocks = <&gcc GCC_PCIE3X2_PIPE_CLK>, + <&gcc GCC_PCIE3X2_PHY_AHB_CLK>; + + resets = <&gcc GCC_PCIE3X2_PHY_BCR>, + <&gcc GCC_PCIE3X2_PHY_AHB_CLK_ARES>, + <&gcc GCC_PCIE3X2PHY_PHY_BCR>; + + #clock-cells = <0>; + + #phy-cells = <0>; + + num-lanes = <2>; + + status = "disabled"; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5332-tlmm"; reg = <0x01000000 0x300000>; @@ -182,11 +315,11 @@ reg = <0x01800000 0x80000>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; + #interconnect-cells = <1>; clocks = <&xo_board>, <&sleep_clk>, - <0>, - <0>, + <&pcie1_phy>, + <&pcie0_phy>, <0>; }; @@ -290,6 +423,53 @@ status = "disabled"; }; + usb: usb@8af8800 { + compatible = "qcom,ipq5332-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "core", + "sleep", + "mock_utmi"; + + resets = <&gcc GCC_USB_BCR>; + + qcom,select-utmi-as-pipe-clk; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + interconnects = <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>, + <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>; + interconnect-names = "usb-ddr", "apps-usb"; + + status = "disabled"; + + usb_dwc: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x08a00000 0xe000>; + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "ref"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + phy-names = "usb2-phy"; + phys = <&usbphy0>; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ @@ -335,8 +515,8 @@ "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; #clock-cells = <1>; - clocks = <&a53pll>, <&xo_board>; - clock-names = "pll", "xo"; + clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; #mbox-cells = <1>; }; @@ -405,6 +585,283 @@ status = "disabled"; }; }; + + pcie1: pcie@18000000 { + compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574"; + reg = <0x18000000 0xf1c>, + <0x18000f20 0xa8>, + <0x18001000 0x1000>, + <0x00088000 0x3000>, + <0x18100000 0x1000>, + <0x0008b000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <1>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x00100000>, + <0x02000000 0x0 0x18300000 0x18300000 0x0 0x07d00000>; + + msi-map = <0x0 &v2m0 0x0 0xffd>; + + interrupts = <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE3X2_AXI_M_CLK>, + <&gcc GCC_PCIE3X2_AXI_S_CLK>, + <&gcc GCC_PCIE3X2_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE3X2_RCHG_CLK>, + <&gcc GCC_PCIE3X2_AHB_CLK>, + <&gcc GCC_PCIE3X2_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + assigned-clocks = <&gcc GCC_PCIE3X2_AUX_CLK>; + + assigned-clock-rates = <2000000>; + + resets = <&gcc GCC_PCIE3X2_PIPE_ARES>, + <&gcc GCC_PCIE3X2_CORE_STICKY_ARES>, + <&gcc GCC_PCIE3X2_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE3X2_AXI_S_CLK_ARES>, + <&gcc GCC_PCIE3X2_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE3X2_AXI_M_CLK_ARES>, + <&gcc GCC_PCIE3X2_AUX_CLK_ARES>, + <&gcc GCC_PCIE3X2_AHB_CLK_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + interconnects = <&gcc MASTER_SNOC_PCIE3_2_M &gcc SLAVE_SNOC_PCIE3_2_M>, + <&gcc MASTER_ANOC_PCIE3_2_S &gcc SLAVE_ANOC_PCIE3_2_S>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie0: pcie@20000000 { + compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574"; + reg = <0x20000000 0xf1c>, + <0x20000f20 0xa8>, + <0x20001000 0x1000>, + <0x00080000 0x3000>, + <0x20100000 0x1000>, + <0x00083000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config", + "mhi"; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x00100000>, + <0x02000000 0x0 0x20300000 0x20300000 0x0 0x0fd00000>; + + msi-map = <0x0 &v2m0 0x0 0xffd>; + + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE3X1_0_AXI_M_CLK>, + <&gcc GCC_PCIE3X1_0_AXI_S_CLK>, + <&gcc GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE3X1_0_RCHG_CLK>, + <&gcc GCC_PCIE3X1_0_AHB_CLK>, + <&gcc GCC_PCIE3X1_0_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + assigned-clocks = <&gcc GCC_PCIE3X1_0_AUX_CLK>; + + assigned-clock-rates = <2000000>; + + resets = <&gcc GCC_PCIE3X1_0_PIPE_ARES>, + <&gcc GCC_PCIE3X1_0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE3X1_0_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE3X1_0_AXI_S_CLK_ARES>, + <&gcc GCC_PCIE3X1_0_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE3X1_0_AXI_M_CLK_ARES>, + <&gcc GCC_PCIE3X1_0_AUX_CLK_ARES>, + <&gcc GCC_PCIE3X1_0_AHB_CLK_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + interconnects = <&gcc MASTER_SNOC_PCIE3_1_M &gcc SLAVE_SNOC_PCIE3_1_M>, + <&gcc MASTER_ANOC_PCIE3_1_S &gcc SLAVE_ANOC_PCIE3_1_S>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; + + thermal-zones { + rfa-0-thermal { + thermal-sensors = <&tsens 11>; + + trips { + rfa-0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + rfa-1-thermal { + thermal-sensors = <&tsens 12>; + + trips { + rfa-1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + misc-thermal { + thermal-sensors = <&tsens 13>; + + trips { + misc-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-top-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&tsens 14>; + + trips { + cpu-top-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + + cpu-passive { + temperature = <105000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + top-glue-thermal { + thermal-sensors = <&tsens 15>; + + trips { + top-glue-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; }; timer { |