diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/ipq8074.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq8074.dtsi | 75 |
1 files changed, 52 insertions, 23 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index e5b89753aa5c..78e1992b7495 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -32,39 +32,39 @@ #address-cells = <1>; #size-cells = <0>; - CPU0: cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; enable-method = "psci"; }; - CPU1: cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x1>; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; }; - CPU2: cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x2>; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; }; - CPU3: cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x3>; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; }; - L2_0: l2-cache { + l2_0: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -323,6 +323,13 @@ bias-disable; }; + serial_5_pins: serial5-state { + pins = "gpio9", "gpio16"; + function = "blsp5_uart"; + drive-strength = <8>; + bias-disable; + }; + i2c_0_pins: i2c-0-state { pins = "gpio42", "gpio43"; function = "blsp1_i2c"; @@ -349,14 +356,14 @@ "gpio5", "gpio6", "gpio7", "gpio8", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", - "gpio15", "gpio16", "gpio17"; + "gpio15", "gpio17"; function = "qpic"; drive-strength = <8>; bias-disable; }; }; - gcc: gcc@1800000 { + gcc: clock-controller@1800000 { compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; clocks = <&xo>, @@ -471,6 +478,18 @@ status = "disabled"; }; + blsp1_uart6: serial@78b4000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b4000 0x200>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-0 = <&serial_5_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + blsp1_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; @@ -647,6 +666,7 @@ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_0>, <&ssphy_0>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -696,6 +716,7 @@ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_1>, <&ssphy_1>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -864,6 +885,16 @@ "ahb", "axi_m_sticky"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0: pcie@20000000 { @@ -929,6 +960,16 @@ "axi_m_sticky", "axi_s_sticky"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; }; @@ -943,7 +984,6 @@ thermal-zones { nss-top-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 4>; @@ -958,7 +998,6 @@ nss0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 5>; @@ -973,7 +1012,6 @@ nss1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 6>; @@ -988,7 +1026,6 @@ wcss-phya0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 7>; @@ -1003,7 +1040,6 @@ wcss-phya1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 8>; @@ -1018,7 +1054,6 @@ cpu0_thermal: cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 9>; @@ -1033,7 +1068,6 @@ cpu1_thermal: cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 10>; @@ -1048,7 +1082,6 @@ cpu2_thermal: cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 11>; @@ -1063,7 +1096,6 @@ cpu3_thermal: cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 12>; @@ -1078,7 +1110,6 @@ cluster_thermal: cluster-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 13>; @@ -1093,7 +1124,6 @@ wcss-phyb0-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 14>; @@ -1108,7 +1138,6 @@ wcss-phyb1-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; thermal-sensors = <&tsens 15>; |