diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi | 79 |
1 files changed, 75 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi index 91e104b0f865..bdb396afb992 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi @@ -3,7 +3,7 @@ * IPQ9574 RDP board common device tree source * * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. */ /dts-v1/; @@ -111,6 +111,13 @@ regulator-always-on; regulator-boot-on; }; + + mp5496_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; }; }; @@ -139,6 +146,50 @@ drive-strength = <8>; bias-pull-up; }; + + qpic_snand_default_state: qpic-snand-default-state { + clock-pins { + pins = "gpio5"; + function = "qspi_clk"; + drive-strength = <8>; + bias-disable; + }; + + cs-pins { + pins = "gpio4"; + function = "qspi_cs"; + drive-strength = <8>; + bias-disable; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qspi_data"; + drive-strength = <8>; + bias-disable; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + pinctrl-0 = <&qpic_snand_default_state>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-engine = <&qpic_nand>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + }; }; &usb_0_dwc3 { @@ -146,7 +197,7 @@ }; &usb_0_qmpphy { - vdda-pll-supply = <&mp5496_l2>; + vdda-pll-supply = <&mp5496_l5>; vdda-phy-supply = <®ulator_fixed_0p925>; status = "okay"; @@ -154,7 +205,7 @@ &usb_0_qusbphy { vdd-supply = <®ulator_fixed_0p925>; - vdda-pll-supply = <&mp5496_l2>; + vdda-pll-supply = <&mp5496_l5>; vdda-phy-dpdm-supply = <®ulator_fixed_3p3>; status = "okay"; @@ -164,6 +215,26 @@ status = "okay"; }; +/* + * The bootstrap pins for the board select the XO clock frequency + * (48 MHZ or 96 MHZ used for different RDP type board). This setting + * automatically enables the right dividers, to ensure the reference + * clock output from WiFi to the CMN PLL is 48 MHZ. + */ +&ref_48mhz_clk { + clock-div = <1>; + clock-mult = <1>; +}; + +/* + * The frequency of xo_board_clk is fixed to 24 MHZ, which is routed + * from WiFi output clock 48 MHZ divided by 2. + */ &xo_board_clk { - clock-frequency = <24000000>; + clock-div = <2>; + clock-mult = <1>; +}; + +&xo_clk { + clock-frequency = <48000000>; }; |