diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 4bfbad669b1e..d2abbdec5fe6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -30,7 +30,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -42,7 +42,7 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; linux,default-trigger = "torch"; function = LED_FUNCTION_TORCH; }; @@ -50,7 +50,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 69 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -66,9 +66,9 @@ touchscreen@26 { compatible = "mstar,msg2638"; reg = <0x26>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_reset_default>; vdd-supply = <&pm8916_l17>; @@ -86,7 +86,7 @@ reg = <0x0c>; vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; mount-matrix = "0", "1", "0", @@ -99,7 +99,7 @@ reg = <0x0f>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <31 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&accel_int_default>; @@ -111,7 +111,7 @@ proximity@48 { compatible = "sensortek,stk3310"; reg = <0x48>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&proximity_int_default>; @@ -122,7 +122,7 @@ reg = <0x68>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <97 IRQ_TYPE_EDGE_RISING>, <98 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; @@ -136,7 +136,7 @@ led-controller@68 { compatible = "si-en,sn3190"; reg = <0x68>; - shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&led_enable_default &led_shutdown_default>; #address-cells = <1>; @@ -182,7 +182,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -202,7 +202,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio31"; function = "gpio"; |