diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 40 |
1 files changed, 20 insertions, 20 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 37a872949851..550ba6b9d4cd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -44,13 +44,13 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; button-home { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -65,7 +65,7 @@ event-hall-sensor { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -83,7 +83,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -96,7 +96,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -105,8 +105,8 @@ i2c-muic { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&muic_i2c_default>; @@ -118,7 +118,7 @@ compatible = "siliconmitus,sm5502-muic"; reg = <0x25>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -128,8 +128,8 @@ i2c-tkey { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&tkey_i2c_default>; @@ -142,7 +142,7 @@ compatible = "coreriver,tc360-touchkey"; reg = <0x20>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <98 IRQ_TYPE_EDGE_FALLING>; /* vcc/vdd-supply are board-specific */ @@ -157,8 +157,8 @@ i2c-nfc { compatible = "i2c-gpio"; - sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; pinctrl-names = "default"; pinctrl-0 = <&nfc_i2c_default>; @@ -170,11 +170,11 @@ compatible = "samsung,s3fwrn5-i2c"; reg = <0x27>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>; - wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; @@ -200,7 +200,7 @@ accelerometer: accelerometer@10 { compatible = "bosch,bmc150_accel"; reg = <0x10>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -225,7 +225,7 @@ battery@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_BOTH>; pinctrl-names = "default"; @@ -274,7 +274,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -286,7 +286,7 @@ extcon = <&muic>; }; -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; |