diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi | 150 |
1 files changed, 28 insertions, 122 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi index 50bae6f214f1..5719933fa8e0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -9,25 +9,14 @@ chassis-type = "embedded"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + serial0 = &blsp_uart2; }; chosen { stdout-path = "serial0"; }; - reserved-memory { - mpss_mem: mpss@86800000 { - reg = <0x0 0x86800000 0x0 0x5500000>; - no-map; - }; - - gps_mem: gps@8bd00000 { - reg = <0x0 0x8bd00000 0x0 0x200000>; - no-map; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -82,34 +71,42 @@ status = "okay"; }; -&blsp1_uart2 { +&blsp_uart2 { + pinctrl-0 = <&blsp_uart2_console_default>; + pinctrl-1 = <&blsp_uart2_console_sleep>; + pinctrl-names = "default", "sleep"; status = "okay"; }; -/* Remove &dsi_phy0 from clocks to make sure that gcc probes with display disabled */ +/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */ &gcc { clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>; }; +&mba_mem { + status = "okay"; +}; + &mpss { status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; + status = "okay"; +}; + &pm8916_usbin { status = "okay"; }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &usb { extcon = <&pm8916_usbin>; - dr_mode = "peripheral"; + usb-role-switch; status = "okay"; }; @@ -118,6 +115,14 @@ extcon = <&pm8916_usbin>; }; +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + &wcnss { status = "okay"; }; @@ -126,110 +131,11 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; +&wcnss_mem { + status = "okay"; }; -&msmgpio { +&tlmm { /* pins are board-specific */ button_default: button-default-state { function = "gpio"; |