diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/pm660.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/pm660.dtsi | 189 |
1 files changed, 184 insertions, 5 deletions
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index 2e6a6f6c3b66..156b2ddff0dc 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -3,9 +3,34 @@ * Copyright (c) 2020, Konrad Dybcio */ +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm660-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&pm660_temp>; + + trips { + pm660_alert0: pm660-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm660_crit: pm660-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { @@ -23,22 +48,165 @@ }; pon: pon@800 { - compatible = "qcom,pm8916-pon"; - + compatible = "qcom,pm8998-pon"; reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; - pwrkey { + pon_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; linux,code = <KEY_POWER>; + + status = "disabled"; + }; + + pon_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + + status = "disabled"; + }; + }; + + pm660_charger: charger@1000 { + compatible = "qcom,pm660-charger"; + reg = <0x1000>; + + interrupts = <0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change"; + + io-channels = <&pm660_rradc 3>, + <&pm660_rradc 4>; + io-channel-names = "usbin_i", "usbin_v"; + + status = "disabled"; + }; + + pm660_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm660_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm660_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@0 { + reg = <ADC5_REF_GND>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + channel@1 { + reg = <ADC5_1P25VREF>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; }; + channel@6 { + reg = <ADC5_DIE_TEMP>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + channel@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "xo_therm"; + }; + + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "msm_therm"; + }; + + channel@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "emmc_therm"; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "pa_therm0"; + }; + + channel@50 { + reg = <ADC5_AMUX_THM4_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "pa_therm1"; + }; + + channel@51 { + reg = <ADC5_AMUX_THM5_100K_PU>; + qcom,pre-scaling = <1 1>; + qcom,decimation = <1024>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "quiet_therm"; + }; + + channel@83 { + reg = <ADC5_VPH_PWR>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + + channel@85 { + reg = <ADC5_VCOIN>; + qcom,decimation = <1024>; + qcom,pre-scaling = <1 3>; + label = "vcoin"; + }; }; - pm660_gpios: gpios@c000 { - compatible = "qcom,pm660-gpio"; + pm660_rradc: adc@4500 { + compatible = "qcom,pm660-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + + status = "disabled"; + }; + + pm660_gpios: gpio@c000 { + compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; gpio-ranges = <&pm660_gpios 0 0 13>; @@ -47,4 +215,15 @@ #interrupt-cells = <2>; }; }; + + pmic@1 { + compatible = "qcom,pm660", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm660_spmi_regulators: regulators { + compatible = "qcom,pm660-regulators"; + }; + }; }; |