diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/pm7250b.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/pm7250b.dtsi | 63 |
1 files changed, 54 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index e8540c36bd99..0761e6b5fd8d 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -11,7 +11,6 @@ thermal-zones { pm7250b-thermal { polling-delay-passive = <100>; - polling-delay = <0>; thermal-sensors = <&pm7250b_temp>; @@ -39,16 +38,62 @@ }; &spmi_bus { - pmic@2 { + pmic@PM7250B_SID { compatible = "qcom,pm7250b", "qcom,spmi-pmic"; - reg = <0x2 SPMI_USID>; + reg = <PM7250B_SID SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + pm7250b_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pm7250b_typec: typec@1500 { + compatible = "qcom,pm7250b-typec", "qcom,pm8150b-typec"; + reg = <0x1500>, + <0x1700>; + interrupts = <PM7250B_SID 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <PM7250B_SID 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <PM7250B_SID 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <PM7250B_SID 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <PM7250B_SID 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + vdd-vbus-supply = <&pm7250b_vbus>; + status = "disabled"; + }; + pm7250b_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; - interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + interrupts = <PM7250B_SID 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; io-channels = <&pm7250b_adc ADC5_DIE_TEMP>; io-channel-names = "thermal"; #thermal-sensor-cells = <0>; @@ -60,7 +105,7 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = <PM7250B_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>; channel@0 { reg = <ADC5_REF_GND>; @@ -141,14 +186,14 @@ pm7250b_adc_tm: adc-tm@3500 { compatible = "qcom,spmi-adc-tm5"; reg = <0x3500>; - interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = <PM7250B_SID 0x35 0x0 IRQ_TYPE_EDGE_RISING>; #thermal-sensor-cells = <1>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; - pm7250b_gpios: pinctrl@c000 { + pm7250b_gpios: gpio@c000 { compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; @@ -159,9 +204,9 @@ }; }; - pmic@3 { + pmic@PM7250B_SID1 { compatible = "qcom,pm7250b", "qcom,spmi-pmic"; - reg = <0x3 SPMI_USID>; + reg = <PM7250B_SID1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; }; |