diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/pm8916.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/pm8916.dtsi | 107 |
1 files changed, 90 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 08f9ca006e72..f8e4829ff7f7 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -4,8 +4,37 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> -&spmi_bus { +/ { + thermal-zones { + pm8916-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8916_temp>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; +&spmi_bus { pm8916_0: pmic@0 { compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; @@ -41,7 +70,36 @@ }; }; - pm8916_usbin: extcon@1300 { + pm8916_charger: charger@1000 { + compatible = "qcom,pm8916-lbc"; + reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>; + reg-names = "chgr", "bat_if", "usb", "misc"; + + interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "vbat_det", + "fast_chg", + "chg_fail", + "chg_done", + "bat_pres", + "temp_ok", + "coarse_det", + "usb_vbus", + "chg_gone", + "overtemp"; + + status = "disabled"; + }; + + pm8916_usbin: usb-detect@1300 { compatible = "qcom,pm8941-misc"; reg = <0x1300>; interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; @@ -66,34 +124,54 @@ #size-cells = <0>; #io-channel-cells = <1>; - adc-chan@0 { + channel@0 { reg = <VADC_USBIN>; qcom,pre-scaling = <1 10>; }; - adc-chan@7 { + channel@7 { reg = <VADC_VSYS>; qcom,pre-scaling = <1 3>; }; - adc-chan@8 { + channel@8 { reg = <VADC_DIE_TEMP>; }; - adc-chan@9 { + channel@9 { reg = <VADC_REF_625MV>; }; - adc-chan@a { + channel@a { reg = <VADC_REF_1250MV>; }; - adc-chan@e { + channel@e { reg = <VADC_GND_REF>; }; - adc-chan@f { + channel@f { reg = <VADC_VDD_VADC>; }; }; + pm8916_bms: battery@4000 { + compatible = "qcom,pm8916-bms-vm"; + reg = <0x4000>; + interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cv_leave", + "cv_enter", + "ocv_good", + "ocv_thr", + "fifo", + "state_chg"; + + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; @@ -138,12 +216,9 @@ status = "disabled"; }; - wcd_codec: audio-codec@f000 { + pm8916_codec: audio-codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; reg = <0xf000>; - reg-names = "pmic-codec-core"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; interrupt-parent = <&spmi_bus>; interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, <0x1 0xf0 0x1 IRQ_TYPE_NONE>, @@ -173,10 +248,8 @@ "cdc_ear_cnp_int", "cdc_hphr_cnp_int", "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; #sound-dai-cells = <1>; + status = "disabled"; }; }; }; |