diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/qcm2290.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qcm2290.dtsi | 75 |
1 files changed, 62 insertions, 13 deletions
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index f0746123e594..f49ac1c1f8a3 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-qcm2290.h> #include <dt-bindings/clock/qcom,qcm2290-gpucc.h> #include <dt-bindings/clock/qcom,rpmcc.h> @@ -550,6 +551,13 @@ bias-disable; }; + qup_uart3_default: qup-uart3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + qup_uart4_default: qup-uart4-default-state { pins = "gpio12", "gpio13"; function = "qup4"; @@ -749,6 +757,30 @@ #interconnect-cells = <2>; }; + cryptobam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x01b04000 0x0 0x24000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x0084 0x11>, + <&apps_smmu 0x0086 0x11>; + }; + + crypto: crypto@1b3a000 { + compatible = "qcom,qcm2290-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0 0x01b3a000 0x0 0x6000>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x0084 0x11>, + <&apps_smmu 0x0086 0x11>; + }; + qfprom@1b44000 { compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; reg = <0x0 0x01b44000 0x0 0x3000>; @@ -1073,7 +1105,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1092,7 +1124,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; @@ -1137,7 +1169,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1184,7 +1216,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1231,7 +1263,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1239,6 +1271,23 @@ status = "disabled"; }; + uart3: serial@4a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart3_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c4: i2c@4a90000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a90000 0x0 0x4000>; @@ -1278,7 +1327,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1297,7 +1346,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; @@ -1342,7 +1391,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1616,7 +1665,7 @@ mdp: display-controller@5e01000 { compatible = "qcom,qcm2290-dpu"; reg = <0x0 0x05e01000 0x0 0x8f000>, - <0x0 0x05eb0000 0x0 0x2008>; + <0x0 0x05eb0000 0x0 0x3000>; reg-names = "mdp", "vbif"; @@ -1702,8 +1751,8 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmpd QCM2290_VDDCX>; @@ -1785,8 +1834,8 @@ <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "gcc_disp_gpll0_clk_src", |