diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/qrb2210-rb1.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 181 |
1 files changed, 164 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 6e9dd0312adc..b2e0fc5501c1 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart4; + serial1 = &uart3; sdhc1 = &sdhc_1; sdhc2 = &sdhc_2; }; @@ -24,7 +25,7 @@ }; clocks { - clk40M: can-clk { + clk40m: can-clk { compatible = "fixed-clock"; clock-frequency = <40000000>; #clock-cells = <0>; @@ -59,6 +60,17 @@ }; }; + i2c2_gpio: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + leds { compatible = "gpio-leds"; @@ -177,29 +189,37 @@ }; }; -&CPU_PD0 { +&cpu_pd0 { /delete-property/ power-domains; }; -&CPU_PD1 { +&cpu_pd1 { /delete-property/ power-domains; }; -&CPU_PD2 { +&cpu_pd2 { /delete-property/ power-domains; }; -&CPU_PD3 { +&cpu_pd3 { /delete-property/ power-domains; }; -/delete-node/ &CLUSTER_PD; +/delete-node/ &cluster_pd; &gpi_dma0 { status = "okay"; }; -&i2c2 { +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/qcm2290/a702_zap.mbn"; + }; +}; + +&i2c2_gpio { clock-frequency = <400000>; status = "okay"; @@ -262,6 +282,46 @@ status = "okay"; }; +&pm4125_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm4125_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pm4125_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; +}; + +&pm4125_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <500000>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -482,7 +542,7 @@ compatible = "microchip,mcp2518fd"; reg = <0>; interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; - clocks = <&clk40M>; + clocks = <&clk40m>; spi-max-frequency = <10000000>; vdd-supply = <&vdc_5v>; xceiver-supply = <&vdc_5v>; @@ -490,6 +550,66 @@ }; &tlmm { + uart3_default: uart3-default-state { + cts-pins { + pins = "gpio8"; + function = "qup3"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio10"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart3_sleep: uart3-sleep-state { + cts-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + tx-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rx-pins { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + lt9611_rst_pin: lt9611-rst-state { pins = "gpio41"; function = "gpio"; @@ -525,6 +645,28 @@ }; }; +&uart3 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&uart3_default>; + pinctrl-1 = <&uart3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3950-bt"; + + vddio-supply = <&pm4125_l15>; + vddxo-supply = <&pm4125_l13>; + vddrf-supply = <&pm4125_l10>; + vddch0-supply = <&pm4125_l22>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + max-speed = <3200000>; + }; +}; + /* UART connected to the Micro-USB port via a FTDI chip */ &uart4 { compatible = "qcom,geni-debug-uart"; @@ -535,14 +677,8 @@ status = "okay"; }; -&usb_qmpphy { - vdda-phy-supply = <&pm4125_l12>; - vdda-pll-supply = <&pm4125_l13>; - status = "okay"; -}; - -&usb_dwc3 { - dr_mode = "host"; +&usb_dwc3_hs { + remote-endpoint = <&pm4125_hs_in>; }; &usb_hsphy { @@ -552,12 +688,23 @@ status = "okay"; }; +&usb_qmpphy { + vdda-phy-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + status = "okay"; +}; + +&usb_qmpphy_out { + remote-endpoint = <&pm4125_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&pm4125_l7>; vdd-1.8-xo-supply = <&pm4125_l13>; vdd-1.3-rfa-supply = <&pm4125_l10>; vdd-3.3-ch0-supply = <&pm4125_l22>; - qcom,ath10k-calibration-variant = "Thundercomm_RB1"; + qcom,calibration-variant = "Thundercomm_RB1"; + firmware-name = "qcm2290"; status = "okay"; }; |