diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/qrb2210-rb1.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 85 |
1 files changed, 84 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 7a789b41c2f1..b2e0fc5501c1 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart4; + serial1 = &uart3; sdhc1 = &sdhc_1; sdhc2 = &sdhc_2; }; @@ -549,6 +550,66 @@ }; &tlmm { + uart3_default: uart3-default-state { + cts-pins { + pins = "gpio8"; + function = "qup3"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio10"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart3_sleep: uart3-sleep-state { + cts-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + tx-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rx-pins { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + lt9611_rst_pin: lt9611-rst-state { pins = "gpio41"; function = "gpio"; @@ -584,6 +645,28 @@ }; }; +&uart3 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&uart3_default>; + pinctrl-1 = <&uart3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3950-bt"; + + vddio-supply = <&pm4125_l15>; + vddxo-supply = <&pm4125_l13>; + vddrf-supply = <&pm4125_l10>; + vddch0-supply = <&pm4125_l22>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + max-speed = <3200000>; + }; +}; + /* UART connected to the Micro-USB port via a FTDI chip */ &uart4 { compatible = "qcom,geni-debug-uart"; @@ -620,7 +703,7 @@ vdd-1.8-xo-supply = <&pm4125_l13>; vdd-1.3-rfa-supply = <&pm4125_l10>; vdd-3.3-ch0-supply = <&pm4125_l22>; - qcom,ath10k-calibration-variant = "Thundercomm_RB1"; + qcom,calibration-variant = "Thundercomm_RB1"; firmware-name = "qcm2290"; status = "okay"; }; |