diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/qrb4210-rb2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 552 |
1 files changed, 542 insertions, 10 deletions
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index dc80f0bca767..0cd36c54632f 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -5,7 +5,14 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/usb/pd.h> #include "sm4250.dtsi" +#include "pm6125.dtsi" +#include "pmi632.dtsi" / { model = "Qualcomm Technologies, Inc. QRB4210 RB2"; @@ -13,27 +20,384 @@ aliases { serial0 = &uart4; + serial1 = &uart3; }; chosen { stdout-path = "serial0:115200n8"; }; - vph_pwr: vph-pwr-regulator { + clocks { + clk40m: can-clk { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&kypd_vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + i2c2_gpio: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + leds { + compatible = "gpio-leds"; + + led-bt { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-user0 { + label = "green:user0"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led-wlan { + label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + sound { + compatible = "qcom,qrb4210-rb2-sndcard"; + pinctrl-0 = <&lpi_i2s2_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB2-WSA8815-Speakers-DMIC0"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + + cpu { + sound-dai = <&q6afedai SECONDARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + }; + + vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 { + compatible = "regulator-fixed"; + regulator-name = "VREG_HDMI_OUT_1P2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdc_1v2>; + regulator-always-on; + regulator-boot-on; + }; + + lt9611_3v3: regulator-lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdc_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + /* Main barrel jack input */ + vdc_12v: regulator-vdc-12v { + compatible = "regulator-fixed"; + regulator-name = "DC_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* 1.2V supply stepped down from the barrel jack input */ + vdc_1v2: regulator-vdc-1v2 { + compatible = "regulator-fixed"; + regulator-name = "VDC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdc_12v>; + regulator-always-on; + regulator-boot-on; + }; + + /* 3.3V supply stepped down from the barrel jack input */ + vdc_3v3: regulator-vdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdc_12v>; + regulator-always-on; + regulator-boot-on; + }; + + /* 5V supply stepped down from the barrel jack input */ + vdc_5v: regulator-vdc-5v { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* "Battery" voltage for the SoM, stepped down from the barrel jack input */ + vdc_vbat_som: regulator-vdc-vbat { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; + + /* PMI632 charger out, supplied by VBAT */ + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; + vin-supply = <&vdc_vbat_som>; regulator-always-on; regulator-boot-on; }; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qrb4210/a610_zap.mbn"; +}; + +&i2c2_gpio { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_hdmi_out_1p2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + pinctrl-names = "default"; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l18a_1p232>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + +&pm6125_gpios { + kypd_vol_up_n: kypd-vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pmi632_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmi632_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pmi632_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; +}; + +&pmi632_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1000000>; + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */ +&q6afedai { + dai@20 { + reg = <SECONDARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; +}; + &qupv3_id_0 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qrb4210/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qrb4210/cdsp.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qrb4210/modem.mbn"; + + status = "okay"; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-pm6125-regulators"; @@ -86,6 +450,7 @@ vreg_l5a_2p96: l5 { regulator-min-microvolt = <1648000>; regulator-max-microvolt = <3056000>; + regulator-allow-set-load; }; vreg_l6a_0p6: l6 { @@ -99,13 +464,16 @@ }; vreg_l8a_0p664: l8 { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <728000>; + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <640000>; }; vreg_l9a_1p8: l9 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-boot-on; }; vreg_l10a_1p8: l10 { @@ -116,6 +484,7 @@ vreg_l11a_1p8: l11 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1952000>; + regulator-allow-set-load; }; vreg_l12a_1p8: l12 { @@ -141,11 +510,13 @@ vreg_l16a_1p3: l16 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1904000>; + regulator-allow-set-load; }; vreg_l17a_1p3: l17 { regulator-min-microvolt = <1152000>; regulator-max-microvolt = <1384000>; + regulator-allow-set-load; }; vreg_l18a_1p232: l18 { @@ -176,8 +547,9 @@ }; vreg_l23a_3p3: l23 { - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3400000>; + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + regulator-allow-set-load; }; vreg_l24a_2p96: l24 { @@ -190,6 +562,10 @@ }; &sdhc_1 { + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l24a_2p96>; vqmmc-supply = <&vreg_l11a_1p8>; no-sdio; @@ -199,7 +575,12 @@ }; &sdhc_2 { - cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */ + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */ + + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l22a_2p96>; vqmmc-supply = <&vreg_l5a_2p96>; no-sdio; @@ -207,21 +588,172 @@ status = "okay"; }; +&spi5 { + status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk40m>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + &sleep_clk { - clock-frequency = <32000>; + clock-frequency = <32764>; }; &tlmm { - gpio-reserved-ranges = <37 5>, <43 2>, <47 1>, - <49 1>, <52 1>, <54 1>, + gpio-reserved-ranges = <43 2>, <49 1>, <54 1>, <56 3>, <61 2>, <64 1>, <68 1>, <72 8>, <96 1>; + + uart3_default: uart3-default-state { + cts-pins { + pins = "gpio8"; + function = "qup3"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio10"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart3_sleep: uart3-sleep-state { + cts-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + tx-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rx-pins { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio41"; + function = "gpio"; + input-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio46"; + function = "gpio"; + bias-disable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&uart3 { + interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&uart3_default>; + pinctrl-1 = <&uart3_sleep>; + pinctrl-names = "default", "sleep"; + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&vreg_l9a_1p8>; + vddxo-supply = <&vreg_l16a_1p3>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l23a_3p3>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + max-speed = <3200000>; + }; }; &uart4 { status = "okay"; }; +&usb { + status = "okay"; +}; + +&usb_dwc3_hs { + remote-endpoint = <&pmi632_hs_in>; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l15a_3p128>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4a_0p9>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + +&usb_qmpphy_out { + remote-endpoint = <&pmi632_ss_in>; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>; + vdd-1.8-xo-supply = <&vreg_l16a_1p3>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l23a_3p3>; + qcom,calibration-variant = "Thundercomm_RB2"; + firmware-name = "qrb4210"; + + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; |