diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sa8155p-adp.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 95 |
1 files changed, 44 insertions, 51 deletions
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 339fea522509..388d5ecee949 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -7,7 +7,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/gpio/gpio.h> -#include "sm8150.dtsi" +#include "sa8155p.dtsi" #include "pmm8155au_1.dtsi" #include "pmm8155au_2.dtsi" @@ -47,29 +47,6 @@ vin-supply = <&vreg_3p3>; }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <1>; - snps,tx-sched-wrr; - - queue0 { - snps,weight = <0x10>; - snps,dcb-algorithm; - snps,priority = <0x0>; - }; - }; }; &apps_rsc { @@ -306,7 +283,7 @@ vreg_l13c_2p96: ldo13 { regulator-name = "vreg_l13c_2p96"; - regulator-min-microvolt = <2504000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -349,24 +326,54 @@ phy-handle = <&rgmii_phy>; phy-mode = "rgmii"; - max-speed = <1000>; mdio { - #address-cells = <0x1>; - #size-cells = <0x0>; - compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; /* Micrel KSZ9031RNZ PHY */ rgmii_phy: phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x7>; - interrupt-parent = <&tlmm>; - interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */ + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; device_type = "ethernet-phy"; - compatible = "ethernet-phy-ieee802.3-c22"; }; }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + }; +}; + +&pmm8155au_1_gpios { + pmm8155au_1_sdc2_cd: sdc2-cd-default-state { + pins = "gpio4"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; }; &qupv3_id_1 { @@ -375,21 +382,21 @@ &remoteproc_adsp { status = "okay"; - firmware-name = "qcom/sa8155p/adsp.mdt"; + firmware-name = "qcom/sa8155p/adsp.mbn"; }; &remoteproc_cdsp { status = "okay"; - firmware-name = "qcom/sa8155p/cdsp.mdt"; + firmware-name = "qcom/sa8155p/cdsp.mbn"; }; &sdhc_2 { status = "okay"; - cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; + pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>; + pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>; vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ bus-width = <4>; @@ -507,13 +514,6 @@ bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; }; sdc2_off: sdc2-off-state { @@ -534,13 +534,6 @@ bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; }; usb2phy_ac_en1_default: usb2phy-ac-en1-default-state { |