diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 44 |
1 files changed, 11 insertions, 33 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 681637cf6c4a..b398f69917f0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/sound/sc7180-lpass.h> #include "sc7180.dtsi" +#include "sc7180-firmware-tfa.dtsi" /* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */ #include "pm6150.dtsi" #include "pm6150l.dtsi" @@ -20,9 +21,6 @@ / { thermal-zones { charger_thermal: charger-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm6150_adc_tm 0>; trips { @@ -43,6 +41,7 @@ * required by the board dts. */ +/delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; /delete-node/ &ipa_fw_mem; /delete-node/ &xbl_mem; @@ -358,10 +357,11 @@ #sound-dai-cells = <0>; }; - pwmleds { + pwmleds: pwmleds { compatible = "pwm-leds"; + status = "disabled"; + keyboard_backlight: led-0 { - status = "disabled"; label = "cros_ec::kbd_backlight"; function = LED_FUNCTION_KBD_BACKLIGHT; pwms = <&cros_ec_pwm 0>; @@ -371,7 +371,6 @@ sound: sound { compatible = "google,sc7180-trogdor"; - model = "sc7180-rt5682-max98357a-1mic"; audio-routing = "Headphone Jack", "HPOL", @@ -649,6 +648,7 @@ ap_ec_spi: &spi6 { pinctrl-names = "default"; pinctrl-0 = <&ap_ec_int_l>; spi-max-frequency = <3000000>; + wakeup-source; cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; @@ -746,32 +746,6 @@ ap_tp_i2c: &i2c7 { hp_i2c: &i2c9 { status = "okay"; clock-frequency = <400000>; - - alc5682: codec@1a { - compatible = "realtek,rt5682i"; - reg = <0x1a>; - pinctrl-names = "default"; - pinctrl-0 = <&hp_irq>; - - #sound-dai-cells = <1>; - - interrupt-parent = <&tlmm>; - /* - * This will get ignored because the interrupt type - * is set in rt5682.c. - */ - interrupts = <28 IRQ_TYPE_EDGE_BOTH>; - - AVDD-supply = <&pp1800_alc5682>; - DBVDD-supply = <&pp1800_alc5682>; - LDO1-IN-supply = <&pp1800_alc5682>; - MICVDD-supply = <&pp3300_codec>; - VBAT-supply = <&pp3300_audio>; - - realtek,dmic1-data-pin = <1>; - realtek,dmic1-clk-pin = <1>; - realtek,jd-src = <1>; - }; }; &lpasscc { @@ -837,10 +811,11 @@ hp_i2c: &i2c9 { }; &pm6150_adc { - charger-thermistor@4f { + channel@4f { reg = <ADC5_AMUX_THM3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; + label = "charger_therm"; }; }; @@ -968,6 +943,8 @@ ap_spi_fp: &spi10 { vddrf-supply = <&pp1300_l2c>; vddch0-supply = <&pp3300_l10c>; max-speed = <3200000>; + + qcom,local-bd-address-broken; }; }; @@ -1189,6 +1166,7 @@ ap_spi_fp: &spi10 { }; &pm6150l_gpios { + status = "disabled"; /* No GPIOs are consumed or configured */ gpio-line-names = "AP_SUSPEND", "", "", |