diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 39 |
1 files changed, 16 insertions, 23 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index df49564ae6dc..469a5d103e3d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -16,7 +16,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" /* PMICs depend on spmi_bus label and so must come after SoC */ #include "pm7325.dtsi" @@ -87,7 +87,7 @@ * are left out of here since they are managed elsewhere. */ - pm7325-regulators { + regulators-0 { compatible = "qcom,pm7325-rpmh-regulators"; qcom,pmic-id = "b"; @@ -188,7 +188,7 @@ }; }; - pm8350c-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -230,9 +230,15 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + /* + * The initial design of this regulator was to use it as 3.3V, + * but due to later changes in design it was changed to 1.8V. + * The original name is kept due to same schematic. + */ + ts_avccio: vreg_l3c_3p0: ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3540000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -336,11 +342,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&ipa { - status = "okay"; - modem-init; -}; - &lpass_va_macro { vdd-micb-supply = <&vreg_bob>; }; @@ -353,14 +354,9 @@ backlight = <&pm8350c_pwm_backlight>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - edp_panel_in: endpoint { - remote-endpoint = <&mdss_edp_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; }; }; }; @@ -387,13 +383,13 @@ }; &pmk8350_vadc { - pmk8350-die-temp@3 { + channel@3 { reg = <PMK8350_ADC7_DIE_TEMP>; label = "pmk8350_die_temp"; qcom,pre-scaling = <1 1>; }; - pmr735a-die-temp@403 { + channel@403 { reg = <PMR735A_ADC7_DIE_TEMP>; label = "pmr735a_die_temp"; qcom,pre-scaling = <1 1>; @@ -418,7 +414,6 @@ wcd_rx: codec@0,4 { compatible = "sdw20217010d00"; reg = <0 4>; - #sound-dai-cells = <1>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; @@ -427,13 +422,11 @@ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; - #sound-dai-cells = <1>; qcom,tx-port-mapping = <1 2 3 4>; }; }; uart_dbg: &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; |