diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8180x-primus.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 126 |
1 files changed, 94 insertions, 32 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index 834e6f9fb7c8..aff398390eba 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> @@ -13,6 +14,8 @@ #include "sc8180x.dtsi" #include "sc8180x-pmics.dtsi" +/delete-node/ &gpu_mem; + / { model = "Qualcomm SC8180x Primus"; compatible = "qcom,sc8180x-primus", "qcom,sc8180x"; @@ -42,7 +45,7 @@ pinctrl-0 = <&hall_int_active_state>; lid-switch { - gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; wakeup-source; @@ -70,7 +73,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_prim_role_switch>; + remote-endpoint = <&usb_prim_dwc3_hs>; }; }; @@ -105,7 +108,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_sec_role_switch>; + remote-endpoint = <&usb_sec_dwc3_hs>; }; }; @@ -135,7 +138,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; wlan_mem: wlan-region@8bc00000 { @@ -222,6 +225,32 @@ vin-supply = <&vph_pwr>; }; + vreg_usb2_host_en: regulator-usb2-host-en { + compatible = "regulator-fixed"; + regulator-name = "usb2_host_en"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&pmc8180_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + }; + + vreg_usb3_host_en: regulator-usb3-host-en { + compatible = "regulator-fixed"; + regulator-name = "usb3_host_en"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&pmc8180_2_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + }; + usbprim-sbu-mux { compatible = "pericom,pi3usb102", "gpio-sbu-mux"; @@ -385,12 +414,18 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l10e_2p9: ldo10 { regulator-min-microvolt = <2904000>; regulator-max-microvolt = <2904000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l12e: ldo12 { @@ -409,11 +444,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; }; &i2c1 { @@ -498,8 +532,6 @@ }; &mdss_edp { - data-lanes = <0 1 2 3>; - pinctrl-names = "default"; pinctrl-0 = <&edp_hpd_active>; @@ -518,20 +550,16 @@ }; }; }; +}; - ports { - port@1 { - reg = <1>; - mdss_edp_out: endpoint { - remote-endpoint = <&auo_b133han05_in>; - }; - }; - }; +&mdss_edp_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&auo_b133han05_in>; }; &pcie1 { - perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie2_default_state>; @@ -545,6 +573,10 @@ status = "okay"; }; +&pmc8180_pwrkey { + status = "okay"; +}; + &pmc8180c_lpg { status = "okay"; }; @@ -616,6 +648,40 @@ status = "okay"; }; +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + &usb_prim_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; @@ -641,6 +707,10 @@ dr_mode = "host"; }; +&usb_prim_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_prim_qmpphy_dp_in { remote-endpoint = <&mdss_dp0_out>; }; @@ -649,10 +719,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_prim_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_sec_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; @@ -678,10 +744,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_sec_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_sec { status = "okay"; }; @@ -690,6 +752,10 @@ dr_mode = "host"; }; +&usb_sec_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &wifi { memory-region = <&wlan_mem>; @@ -702,10 +768,6 @@ status = "okay"; }; -&xo_board_clk { - clock-frequency = <38400000>; -}; - /* PINCTRL */ &pmc8180c_gpios { |