diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8180x-primus.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 88 |
1 files changed, 74 insertions, 14 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index bfee60c93ccc..7a4bd6955470 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -71,7 +71,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_prim_role_switch>; + remote-endpoint = <&usb_prim_dwc3_hs>; }; }; @@ -106,7 +106,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_sec_role_switch>; + remote-endpoint = <&usb_sec_dwc3_hs>; }; }; @@ -223,6 +223,32 @@ vin-supply = <&vph_pwr>; }; + vreg_usb2_host_en: regulator-usb2-host-en { + compatible = "regulator-fixed"; + regulator-name = "usb2_host_en"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&pmc8180_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + }; + + vreg_usb3_host_en: regulator-usb3-host-en { + compatible = "regulator-fixed"; + regulator-name = "usb3_host_en"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&pmc8180_2_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + }; + usbprim-sbu-mux { compatible = "pericom,pi3usb102", "gpio-sbu-mux"; @@ -552,6 +578,10 @@ status = "okay"; }; +&pmc8180_pwrkey { + status = "okay"; +}; + &pmc8180c_lpg { status = "okay"; }; @@ -623,6 +653,40 @@ status = "okay"; }; +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + &usb_prim_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; @@ -648,6 +712,10 @@ dr_mode = "host"; }; +&usb_prim_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_prim_qmpphy_dp_in { remote-endpoint = <&mdss_dp0_out>; }; @@ -656,10 +724,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_prim_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_sec_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; @@ -685,10 +749,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_sec_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_sec { status = "okay"; }; @@ -697,6 +757,10 @@ dr_mode = "host"; }; +&usb_sec_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &wifi { memory-region = <&wlan_mem>; @@ -709,10 +773,6 @@ status = "okay"; }; -&xo_board_clk { - clock-frequency = <38400000>; -}; - /* PINCTRL */ &pmc8180c_gpios { |