diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8280xp-crd.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 291 |
1 files changed, 245 insertions, 46 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index b566e403d1db..c53e00cae465 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -20,6 +20,7 @@ i2c4 = &i2c4; i2c21 = &i2c21; serial0 = &uart17; + serial1 = &uart2; }; backlight: backlight { @@ -36,6 +37,20 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&kypd_vol_up_n>; + pinctrl-names = "default"; + + key-vol-up { + label = "volume_up"; + gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + }; + }; + pmic-glink { compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; @@ -56,7 +71,7 @@ reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_0_role_switch>; + remote-endpoint = <&usb_0_dwc3_hs>; }; }; @@ -91,7 +106,7 @@ reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_1_role_switch>; + remote-endpoint = <&usb_1_dwc3_hs>; }; }; @@ -133,7 +148,7 @@ vreg_edp_bl: regulator-edp-bl { compatible = "regulator-fixed"; - regulator-name = "VBL9"; + regulator-name = "VREG_EDP_BL"; regulator-min-microvolt = <3600000>; regulator-max-microvolt = <3600000>; @@ -149,7 +164,7 @@ vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; - regulator-name = "VCC3_SSD"; + regulator-name = "VREG_NVME_3P3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -163,11 +178,11 @@ vreg_misc_3p3: regulator-misc-3p3 { compatible = "regulator-fixed"; - regulator-name = "VCC3B"; + regulator-name = "VREG_MISC_3P3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -180,7 +195,7 @@ vreg_wlan: regulator-wlan { compatible = "regulator-fixed"; - regulator-name = "VCC_WLAN_3R9"; + regulator-name = "VPH_PWR_WLAN"; regulator-min-microvolt = <3900000>; regulator-max-microvolt = <3900000>; @@ -196,7 +211,7 @@ vreg_wwan: regulator-wwan { compatible = "regulator-fixed"; - regulator-name = "VCC3B_WAN"; + regulator-name = "SDX_VPH_PWR"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -210,11 +225,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -234,7 +244,6 @@ mode-switch; orientation-switch; - svid = /bits/ 16 <0xff01>; port { usb0_sbu_mux: endpoint { @@ -254,7 +263,6 @@ mode-switch; orientation-switch; - svid = /bits/ 16 <0xff01>; port { usb1_sbu_mux: endpoint { @@ -262,6 +270,70 @@ }; }; }; + + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + pinctrl-0 = <&bt_en>, <&wlan_en>; + pinctrl-names = "default"; + + wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; + + vddio-supply = <&vreg_s10b>; + vddaon-supply = <&vreg_s12b>; + vddpmu-supply = <&vreg_s12b>; + vddpmumx-supply = <&vreg_s12b>; + vddpmucx-supply = <&vreg_s12b>; + vddrfa0p95-supply = <&vreg_s12b>; + vddrfa1p3-supply = <&vreg_s11b>; + vddrfa1p9-supply = <&vreg_s1c>; + vddpcie1p3-supply = <&vreg_s11b>; + vddpcie1p9-supply = <&vreg_s1c>; + + regulators { + vreg_pmu_rfa_cmn_0p8: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn_0p8"; + }; + + vreg_pmu_aon_0p8: ldo1 { + regulator-name = "vreg_pmu_aon_0p8"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p8: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p8"; + }; + + vreg_pmu_btcmx_0p8: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p8"; + }; + + vreg_pmu_pcie_1p8: ldo5 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo6 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_rfa_0p8: ldo7 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo8 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo9 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + }; + }; }; &apps_rsc { @@ -271,6 +343,15 @@ vdd-l3-l5-supply = <&vreg_s11b>; + vreg_s10b: smps10 { + regulator-name = "vreg_s10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; + }; + vreg_s11b: smps11 { regulator-name = "vreg_s11b"; regulator-min-microvolt = <1272000>; @@ -278,6 +359,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_s12b: smps12 { + regulator-name = "vreg_s12b"; + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l3b: ldo3 { regulator-name = "vreg_l3b"; regulator-min-microvolt = <1200000>; @@ -306,6 +394,13 @@ compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <1888000>; + regulator-max-microvolt = <1888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; regulator-min-microvolt = <1800000>; @@ -395,13 +490,24 @@ status = "okay"; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; }; &mdss0 { @@ -448,18 +554,15 @@ }; }; }; +}; - ports { - port@1 { - reg = <1>; - mdss0_dp3_out: endpoint { - remote-endpoint = <&edp_panel_in>; - }; - }; - }; +&mdss0_dp3_out { + remote-endpoint = <&edp_panel_in>; }; &mdss0_dp3_phy { + compatible = "qcom,sc8280xp-edp-phy"; + vdda-phy-supply = <&vreg_l6b>; vdda-pll-supply = <&vreg_l3b>; @@ -563,6 +666,8 @@ }; &pcie4 { + max-link-speed = <2>; + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; @@ -581,6 +686,25 @@ status = "okay"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + + qcom,calibration-variant = "QC_8280XP_CRD"; + }; +}; + &pmc8280c_lpg { status = "okay"; }; @@ -628,6 +752,12 @@ status = "okay"; }; +&remoteproc_slpi { + firmware-name = "qcom/sc8280xp/qcslpi8280.mbn"; + + status = "okay"; +}; + &sdc2 { pinctrl-0 = <&sdc2_default_state>; pinctrl-1 = <&sdc2_sleep_state>; @@ -641,6 +771,26 @@ status = "okay"; }; +&uart2 { + pinctrl-0 = <&uart2_default>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + }; +}; + &uart17 { compatible = "qcom,geni-debug-uart"; @@ -673,6 +823,10 @@ dr_mode = "host"; }; +&usb_0_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_0_hsphy { vdda-pll-supply = <&vreg_l9d>; vdda18-supply = <&vreg_l1c>; @@ -698,10 +852,6 @@ remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_0_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_1 { status = "okay"; }; @@ -710,6 +860,10 @@ dr_mode = "host"; }; +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &usb_1_hsphy { vdda-pll-supply = <&vreg_l4b>; vdda18-supply = <&vreg_l1c>; @@ -735,10 +889,6 @@ remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_1_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &xo_board_clk { clock-frequency = <38400000>; }; @@ -756,8 +906,16 @@ function = "normal"; }; + kypd_vol_up_n: kypd-vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <0>; /* 3.3 V */ + bias-pull-up; + input-enable; + }; + misc_3p3_reg_en: misc-3p3-reg-en-state { - pins = "gpio1"; + pins = "gpio2"; function = "normal"; }; }; @@ -786,6 +944,13 @@ &tlmm { gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + bt_en: bt-en-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; @@ -846,15 +1011,15 @@ pins = "gpio143"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { - pins = "gpio145"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; pcie3a_default: pcie3a-default-state { @@ -869,7 +1034,7 @@ pins = "gpio151"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { @@ -892,7 +1057,7 @@ pins = "gpio141"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { @@ -975,8 +1140,35 @@ reset-n-pins { pins = "gpio99"; function = "gpio"; - output-high; - drive-strength = <16>; + bias-disable; + }; + }; + + uart2_default: uart2-default-state { + cts-pins { + pins = "gpio121"; + function = "qup2"; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio122"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio124"; + function = "qup2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio123"; + function = "qup2"; + drive-strength = <2>; + bias-disable; }; }; @@ -1029,4 +1221,11 @@ output-high; }; }; + + wlan_en: wlan-en-state { + pins = "gpio134"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; }; |