diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 101 |
1 files changed, 97 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index 80ee12ded4f4..307df1d3dcd2 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -3,6 +3,9 @@ * Copyright (c) 2022, Linaro Limited */ +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -11,7 +14,7 @@ thermal-zones { pm8280_1_thermal: pm8280-1-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8280_1_temp_alarm>; trips { @@ -29,9 +32,29 @@ }; }; + pmc8280c_thermal: pmc8280c-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8280c_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + pm8280_2_thermal: pm8280-2-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm8280_2_temp_alarm>; trips { @@ -48,6 +71,26 @@ }; }; }; + + pmr735a_thermal: pmr735a-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmr735a_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; }; }; @@ -84,7 +127,37 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - status = "disabled"; + + channel@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_die_temp"; + }; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "pmk8350_xo_therm"; + }; + + channel@103 { + reg = <PM8350_ADC7_DIE_TEMP(1)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_1_die_temp"; + }; + + channel@303 { + reg = <PM8350_ADC7_DIE_TEMP(3)>; + qcom,pre-scaling = <1 1>; + label = "pmc8280_2_die_temp"; + }; + + channel@403 { + reg = <PMR735A_ADC7_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pmr735a_die_temp"; + }; }; pmk8280_adc_tm: adc-tm@3400 { @@ -126,6 +199,8 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>; + io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; @@ -146,6 +221,13 @@ #address-cells = <1>; #size-cells = <0>; + pmc8280c_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmc8280c_gpios: gpio@8800 { compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; reg = <0x8800>; @@ -177,7 +259,9 @@ pm8280_2_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; - interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&spmi_bus 0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>; + io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; @@ -198,6 +282,15 @@ #address-cells = <1>; #size-cells = <0>; + pmr735a_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmk8280_vadc PMR735A_ADC7_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + pmr735a_gpios: gpio@8800 { compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; reg = <0x8800>; |