diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 72 |
1 files changed, 62 insertions, 10 deletions
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 7c81918eee66..74cb29cb7f1a 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -29,7 +29,7 @@ gpio-keys { compatible = "gpio-keys"; - volup { + key-volup { label = "Volume Up"; gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -43,7 +43,7 @@ */ extcon_usb: extcon-usb { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; }; hdmi-out { @@ -96,6 +96,26 @@ vin-supply = <&vph_pwr>; }; + + /* + * this is also used for APC1 CPU power, touching it resets the board + */ + vreg_l10a_1p8: vreg-l10a-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1804000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&adreno_gpu { + status = "okay"; +}; + +&adreno_gpu_zap { + firmware-name = "qcom/sda660/a512_zap.mbn"; }; &adsp_pil { @@ -134,7 +154,7 @@ reg = <0>; adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -155,6 +175,7 @@ * BAM DMA interconnects support is in place. */ /delete-property/ clocks; + /delete-property/ clock-names; }; &blsp1_uart2 { @@ -167,6 +188,7 @@ * BAM DMA interconnects support is in place. */ /delete-property/ clocks; + /delete-property/ clock-names; }; &blsp2_uart1 { @@ -183,25 +205,25 @@ }; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l1a_1p225>; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&adv7533_in>; data-lanes = <0 1 2 3>; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vcca-supply = <&vreg_l1b_0p925>; }; -&mdss { - status = "okay"; -}; - &mmss_smmu { status = "okay"; }; @@ -220,6 +242,7 @@ status = "okay"; vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; }; @@ -227,9 +250,15 @@ status = "okay"; vdd-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; }; +&remoteproc_mss { + firmware-name = "qcom/sda660/mba.mbn", "qcom/sda660/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm660-regulators"; @@ -269,6 +298,11 @@ regulator-allow-set-load; }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <848000>; + }; + vreg_l6a_1p3: l6 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1368000>; @@ -461,3 +495,21 @@ dr_mode = "peripheral"; extcon = <&extcon_usb>; }; + +&usb3_qmpphy { + vdda-phy-supply = <&vreg_l1b_0p925>; + vdda-pll-supply = <&vreg_l10a_1p8>; + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l9a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l6a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l19a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l8b_3p3>; + + qcom,calibration-variant = "Inforce_IFC6560"; + + status = "okay"; +}; |