diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts | 238 |
1 files changed, 0 insertions, 238 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts deleted file mode 100644 index 2b7230594ecb..000000000000 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts +++ /dev/null @@ -1,238 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Cheza board device tree source - * - * Copyright 2018 Google LLC. - */ - -/dts-v1/; - -#include "sdm845-cheza.dtsi" - -/ { - model = "Google Cheza (rev2)"; - compatible = "google,cheza-rev2", "qcom,sdm845"; - - /* - * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children - */ - - /* - * NOTE: Technically pp3500_a is not the exact same signal as - * pp3500_a_vbob (there's a load switch between them and the EC can - * control pp3500_a via "en_pp3300_a"), but from the AP's point of - * view they are the same. - */ - pp3500_a: - pp3500_a_vbob: pp3500-a-vbob-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_bob"; - - /* - * Comes on automatically when pp5000_ldo comes on, which - * comes on automatically when ppvar_sys comes on - */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3500000>; - regulator-max-microvolt = <3500000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_dx_edp: pp3300-dx-edp-regulator { - /* Yes, it's really 3.5 despite the name of the signal */ - regulator-min-microvolt = <3500000>; - regulator-max-microvolt = <3500000>; - - vin-supply = <&pp3500_a>; - }; -}; - -/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ - -/* - * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware - * that limits them to 3.0, and trying to run at 3.3V with that old firmware - * prevents the system from booting. - */ -&src_pp3000_l19a { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; -}; - -&src_pp3300_l22a { - /delete-property/regulator-boot-on; - /delete-property/regulator-always-on; -}; - -&src_pp3300_l28a { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; -}; - -&src_vreg_bob { - regulator-min-microvolt = <3500000>; - regulator-max-microvolt = <3500000>; - vin-supply = <&pp3500_a_vbob>; -}; - -/* - * NON-REGULATOR OVERRIDES - * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label - */ - -/* PINCTRL - board-specific pinctrl */ - -&tlmm { - gpio-line-names = "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "BRIJ_SUSPEND", - "FP_RST_L", - "FCAM_EN", - "", - "EDP_BRIJ_IRQ", - "EC_IN_RW_ODL", - "", - "RCAM_MCLK", - "FCAM_MCLK", - "", - "RCAM_EN", - "CCI0_SDA", - "CCI0_SCL", - "CCI1_SDA", - "CCI1_SCL", - "FCAM_RST_L", - "FPMCU_BOOT0", - "PEN_RST_L", - "PEN_IRQ_L", - "FPMCU_SEL_OD", - "RCAM_VSYNC", - "ESIM_MISO", - "ESIM_MOSI", - "ESIM_CLK", - "ESIM_CS_L", - "AP_PEN_1V8_SDA", - "AP_PEN_1V8_SCL", - "AP_TS_I2C_SDA", - "AP_TS_I2C_SCL", - "RCAM_RST_L", - "", - "AP_EDP_BKLTEN", - "AP_BRD_ID1", - "BOOT_CONFIG_4", - "AMP_IRQ_L", - "EDP_BRIJ_I2C_SDA", - "EDP_BRIJ_I2C_SCL", - "EN_PP3300_DX_EDP", - "SD_CD_ODL", - "BT_UART_RTS", - "BT_UART_CTS", - "BT_UART_RXD", - "BT_UART_TXD", - "AMP_I2C_SDA", - "AMP_I2C_SCL", - "AP_BRD_ID3", - "", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "FORCED_USB_BOOT", - "AMP_BCLK", - "AMP_LRCLK", - "AMP_DOUT", - "AMP_DIN", - "AP_BRD_ID2", - "PEN_PDCT_L", - "HP_MCLK", - "HP_BCLK", - "HP_LRCLK", - "HP_DOUT", - "HP_DIN", - "", - "", - "", - "", - "BT_SLIMBUS_DATA", - "BT_SLIMBUS_CLK", - "AMP_RESET_L", - "", - "FCAM_VSYNC", - "", - "AP_SKU_ID1", - "EC_WOV_BCLK", - "EC_WOV_LRCLK", - "EC_WOV_DOUT", - "", - "", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - "AP_H1_SPI_CLK", - "AP_H1_SPI_CS_L", - "", - "AP_SPI_CS0_L", - "AP_SPI_MOSI", - "AP_SPI_MISO", - "", - "", - "AP_SPI_CLK", - "", - "RFFE6_CLK", - "RFFE6_DATA", - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_0", - "EDP_BRIJ_EN", - "", - "USB_HS_TX_EN", - "UIM2_DATA", - "UIM2_CLK", - "UIM2_RST", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RST", - "", - "AP_SKU_ID2", - "SDM_GRFC_8", - "SDM_GRFC_9", - "AP_RST_REQ", - "HP_IRQ", - "TS_RESET_L", - "PEN_EJECT_ODL", - "HUB_RST_L", - "FP_TO_AP_IRQ", - "AP_EC_INT_L", - "", - "", - "TS_INT_L", - "AP_SUSPEND_L", - "SDM_GRFC_3", - "", - "H1_AP_INT_ODL", - "QLINK_REQ", - "QLINK_EN", - "SDM_GRFC_2", - "BOOT_CONFIG_3", - "WMSS_RESET_L", - "SDM_GRFC_0", - "SDM_GRFC_1", - "RFFE3_DATA", - "RFFE3_CLK", - "RFFE4_DATA", - "RFFE4_CLK", - "RFFE5_DATA", - "RFFE5_CLK", - "GNSS_EN", - "WCI2_LTE_COEX_RXD", - "WCI2_LTE_COEX_TXD", - "AP_RAM_ID1", - "AP_RAM_ID2", - "RFFE1_DATA", - "RFFE1_CLK"; -}; |