diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-db845c.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 39 |
1 files changed, 22 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 1f517328199b..b5c63fa0365d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -31,7 +31,7 @@ }; /* Fixed crystal oscillator dedicated to MCP2517FD */ - clk40M: can-clock { + clk40m: can-clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <40000000>; @@ -195,6 +195,12 @@ gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; enable-active-high; + /* + * FIXME: this regulator is responsible for VBUS on the left USB + * port. Keep it always on until we can correctly model this + * relationship. + */ + regulator-always-on; pinctrl-names = "default"; pinctrl-0 = <&pcie0_pwren_state>; @@ -438,10 +444,6 @@ <GCC_LPASS_SWAY_CLK>; }; -&gmu { - status = "okay"; -}; - &gpi_dma0 { status = "okay"; }; @@ -553,7 +555,8 @@ qcom,dual-dsi-mode; /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; status = "okay"; @@ -711,19 +714,19 @@ &q6asmdai { dai@0 { - reg = <0>; + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; }; dai@1 { - reg = <1>; + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; }; dai@2 { - reg = <2>; + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; }; dai@3 { - reg = <3>; + reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>; direction = <2>; is-compress-dai; }; @@ -750,6 +753,12 @@ cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; }; +&slpi_pas { + firmware-name = "qcom/sdm845/Thundercomm/db845c/slpi.mbn"; + + status = "okay"; +}; + &sound { compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard"; pinctrl-0 = <&quat_mi2s_active @@ -768,11 +777,7 @@ "DMIC2", "MIC BIAS3", "DMIC3", "MIC BIAS3", "SpkrLeft IN", "SPK1 OUT", - "SpkrRight IN", "SPK2 OUT", - "MM_DL1", "MultiMedia1 Playback", - "MM_DL2", "MultiMedia2 Playback", - "MM_DL4", "MultiMedia4 Playback", - "MultiMedia3 Capture", "MM_UL3"; + "SpkrRight IN", "SPK2 OUT"; mm1-dai-link { link-name = "MultiMedia1"; @@ -857,7 +862,7 @@ can@0 { compatible = "microchip,mcp2517fd"; reg = <0>; - clocks = <&clk40M>; + clocks = <&clk40m>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <10000000>; vdd-supply = <&vdc_5v>; @@ -1160,7 +1165,7 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; qcom,snoc-host-cap-8bit-quirk; - qcom,ath10k-calibration-variant = "Thundercomm_DB845C"; + qcom,calibration-variant = "Thundercomm_DB845C"; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ |