diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 99 |
1 files changed, 48 insertions, 51 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 8ae0ffccaab2..30e88ff010a3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include <dt-bindings/arm/qcom,ids.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -38,7 +39,7 @@ chassis-type = "handset"; /* required for bootloader to select correct board */ - qcom,msm-id = <0x141 0x20001>; + qcom,msm-id = <QCOM_ID_SDM845 0x20001>; qcom,board-id = <0x2a 0x0>; aliases { @@ -108,7 +109,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; }; @@ -373,44 +374,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vdda_mipi_dsi0_1p2>; - status = "okay"; - - display_panel: panel@0 { - compatible = "jdi,fhd-nt35596s"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - vddio-supply = <&vreg_l14a_1p8>; - backlight = <&pmi8998_wled>; - vddpos-supply = <&lab>; - vddneg-supply = <&ibb>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sde_dsi_active>; - pinctrl-1 = <&sde_dsi_suspend>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vdds-supply = <&vdda_mipi_dsi0_pll>; - status = "okay"; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -419,10 +382,6 @@ <GCC_LPASS_SWAY_CLK>; }; -&gmu { - status = "okay"; -}; - &gpi_dma0 { status = "okay"; }; @@ -433,11 +392,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; }; &ibb { @@ -483,6 +441,7 @@ }; rmi4-f12@12 { + reg = <0x12>; syna,rezero-wait-ms = <0xc8>; syna,clip-x-high = <0x438>; syna,clip-y-high = <0x870>; @@ -504,6 +463,44 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + status = "okay"; + + display_panel: panel@0 { + compatible = "jdi,fhd-nt35596s"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + vddio-supply = <&vreg_l14a_1p8>; + backlight = <&pmi8998_wled>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active>; + pinctrl-1 = <&sde_dsi_suspend>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + status = "okay"; +}; + &mss_pil { firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn"; status = "okay"; @@ -546,15 +543,15 @@ &q6asmdai { dai@0 { - reg = <0>; + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; }; dai@1 { - reg = <1>; + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; }; dai@2 { - reg = <2>; + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; }; }; |