summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts191
1 files changed, 70 insertions, 121 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index afc17e4d403f..30e88ff010a3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -6,6 +6,7 @@
/dts-v1/;
+#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -13,6 +14,7 @@
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
#include "pm8005.dtsi"
@@ -37,7 +39,7 @@
chassis-type = "handset";
/* required for bootloader to select correct board */
- qcom,msm-id = <0x141 0x20001>;
+ qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
qcom,board-id = <0x2a 0x0>;
aliases {
@@ -55,7 +57,7 @@
key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
};
@@ -107,7 +109,7 @@
no-map;
qcom,client-id = <1>;
- qcom,vmid = <15>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
};
};
@@ -143,7 +145,7 @@
};
&apps_rsc {
- pm8998-rpmh-regulators {
+ regulators-0 {
compatible = "qcom,pm8998-rpmh-regulators";
qcom,pmic-id = "a";
@@ -343,7 +345,7 @@
};
};
- pmi8998-rpmh-regulators {
+ regulators-1 {
compatible = "qcom,pmi8998-rpmh-regulators";
qcom,pmic-id = "b";
@@ -355,7 +357,7 @@
};
};
- pm8005-rpmh-regulators {
+ regulators-2 {
compatible = "qcom,pm8005-rpmh-regulators";
qcom,pmic-id = "c";
@@ -372,44 +374,6 @@
status = "okay";
};
-&dsi0 {
- vdda-supply = <&vdda_mipi_dsi0_1p2>;
- status = "okay";
-
- display_panel: panel@0 {
- compatible = "jdi,fhd-nt35596s";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
- vddio-supply = <&vreg_l14a_1p8>;
- backlight = <&pmi8998_wled>;
- vddpos-supply = <&lab>;
- vddneg-supply = <&ibb>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sde_dsi_active>;
- pinctrl-1 = <&sde_dsi_suspend>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
-};
-
-&dsi0_out {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
- vdds-supply = <&vdda_mipi_dsi0_pll>;
- status = "okay";
-};
-
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -418,10 +382,6 @@
<GCC_LPASS_SWAY_CLK>;
};
-&gmu {
- status = "okay";
-};
-
&gpi_dma0 {
status = "okay";
};
@@ -432,11 +392,10 @@
&gpu {
status = "okay";
+};
- zap-shader {
- memory-region = <&gpu_mem>;
- firmware-name = "qcom/sdm845/polaris/a630_zap.mbn";
- };
+&gpu_zap_shader {
+ firmware-name = "qcom/sdm845/polaris/a630_zap.mbn";
};
&ibb {
@@ -449,6 +408,7 @@
};
&ipa {
+ qcom,gsi-loader = "self";
memory-region = <&ipa_fw_mem>;
firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn";
status = "okay";
@@ -456,9 +416,6 @@
&i2c14 {
clock-frequency = <400000>;
- dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
- <&gpi_dma1 1 6 QCOM_GPI_I2C>;
- dma-names = "tx", "rx";
status = "okay";
touchscreen@20 {
@@ -484,6 +441,7 @@
};
rmi4-f12@12 {
+ reg = <0x12>;
syna,rezero-wait-ms = <0xc8>;
syna,clip-x-high = <0x438>;
syna,clip-y-high = <0x870>;
@@ -505,6 +463,44 @@
status = "okay";
};
+&mdss_dsi0 {
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+ status = "okay";
+
+ display_panel: panel@0 {
+ compatible = "jdi,fhd-nt35596s";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+ vddio-supply = <&vreg_l14a_1p8>;
+ backlight = <&pmi8998_wled>;
+ vddpos-supply = <&lab>;
+ vddneg-supply = <&ibb>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sde_dsi_active>;
+ pinctrl-1 = <&sde_dsi_suspend>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+ status = "okay";
+};
+
&mss_pil {
firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn";
status = "okay";
@@ -521,7 +517,7 @@
status = "okay";
};
-&pm8998_gpio {
+&pm8998_gpios {
volume_up_gpio: pm8998-gpio6-state {
pinconf {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
@@ -533,34 +529,29 @@
};
};
-&pm8998_pon {
- resin {
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- compatible = "qcom,pm8941-resin";
- linux,code = <KEY_VOLUMEDOWN>;
- debounce = <15625>;
- bias-pull-up;
- };
+&pm8998_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
};
&q6afedai {
- qi2s@22 {
- reg = <22>;
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
qcom,sd-lines = <0>;
};
};
&q6asmdai {
dai@0 {
- reg = <0>;
+ reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
dai@1 {
- reg = <1>;
+ reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
};
dai@2 {
- reg = <2>;
+ reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
};
};
@@ -573,72 +564,61 @@
};
&qup_i2c14_default {
- pinconf {
- pins = "gpio33", "gpio34";
- drive-strength = <2>;
- bias-disable;
- };
+ drive-strength = <2>;
+ bias-disable;
};
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
- ts_reset_default: ts-reset-default {
+ ts_reset_default: ts-reset-default-state {
pins = "gpio99";
function = "gpio";
drive-strength = <16>;
output-high;
};
- ts_int_default: ts-int-default {
+ ts_int_default: ts-int-default-state {
pins = "gpio125";
function = "gpio";
bias-pull-down;
drive-strength = <16>;
- input-enable;
};
- ts_reset_sleep: ts-reset-sleep {
+ ts_reset_sleep: ts-reset-sleep-state {
pins = "gpio99";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- ts_int_sleep: ts-int-sleep {
+ ts_int_sleep: ts-int-sleep-state {
pins = "gpio125";
function = "gpio";
bias-pull-down;
drive-strength = <2>;
- input-enable;
};
- sde_dsi_active: sde-dsi-active {
+ sde_dsi_active: sde-dsi-active-state {
pins = "gpio6", "gpio10";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
- sde_dsi_suspend: sde-dsi-suspend {
+ sde_dsi_suspend: sde-dsi-suspend-state {
pins = "gpio6", "gpio10";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
-
- wcd_intr_default: wcd-intr-default {
- pins = "goui54";
- function = "gpio";
- input-enable;
- bias-pull-down;
- drive-strength = <2>;
- };
};
&uart6 {
status = "okay";
+ pinctrl-0 = <&qup_uart6_4pin>;
+
bluetooth {
compatible = "qcom,wcn3990-bt";
@@ -708,10 +688,6 @@
};
&wcd9340 {
- pinctrl-0 = <&wcd_intr_default>;
- pinctrl-names = "default";
- clock-names = "extclk";
- clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-buck-supply = <&vreg_s4a_1p8>;
@@ -731,32 +707,5 @@
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
-
- qcom,snoc-host-cap-skip-quirk;
status = "okay";
};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&qup_uart6_default {
- pinmux {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "qup6";
- };
-
- cts {
- pins = "gpio45";
- bias-disable;
- };
-
- rts-tx {
- pins = "gpio46", "gpio47";
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio48";
- bias-pull-up;
- };
-};
generated by cgit (git 2.34.1) at 2026-01-02 09:00:37 +0000