summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sdx75-idp.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdx75-idp.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/sdx75-idp.dts98
1 files changed, 97 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index 10d15871f2c4..6696e1aee243 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -41,10 +41,33 @@
vin-supply = <&vph_ext>;
};
+
+ reg_2v952_vcc: regulator-2v952-vcc {
+ compatible = "regulator-gpio";
+ regulator-name = "2v952_vcc";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3600000>;
+ enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+ states = <1650000 0>, <3600000 1>;
+ startup-delay-us = <5000>;
+ enable-active-high;
+ regulator-boot-on;
+
+ vin-supply = <&vph_ext>;
+ };
+
+ reg_2v95_vdd: regulator-2v95-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "2v95_vdd";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ vin-supply = <&reg_2v952_vcc>;
+ };
};
&apps_rsc {
- pmx75-rpmh-regulators {
+ regulators-0 {
compatible = "qcom,pmx75-rpmh-regulators";
qcom,pmic-id = "b";
@@ -250,14 +273,87 @@
stdout-path = "serial0:115200n8";
};
+&pm7550ba_eusb2_repeater {
+ vdd18-supply = <&vreg_l5b_1p776>;
+ vdd3-supply = <&vreg_l10b_3p08>;
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ /* efs2 partition is secured */
+ secure-regions = /bits/ 64 <0x680000 0xb00000>;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
+&remoteproc_mpss {
+ firmware-name = "qcom/sdx75/modem.mbn",
+ "qcom/sdx75/modem_dtb.mbn";
+ status = "okay";
+};
+
+&sdhc {
+ cd-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_2v95_vdd>;
+ vqmmc-supply = <&reg_2v952_vcc>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+
+ pinctrl-0 = <&sdc1_default &sd_cd>;
+ pinctrl-1 = <&sdc1_sleep &sd_cd>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <110 6>;
+
+ sd_cd: sd-cd-state {
+ pins = "gpio103";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
&uart1 {
status = "okay";
};
+
+&usb {
+ dr_mode = "peripheral";
+
+ status = "okay";
+};
+
+&usb_hsphy {
+ vdd-supply = <&vreg_l4b_0p88>;
+ vdda12-supply = <&vreg_l1b_1p2>;
+
+ phys = <&pm7550ba_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_qmpphy {
+ vdda-phy-supply = <&vreg_l4b_0p88>;
+ vdda-pll-supply = <&vreg_l1b_1p2>;
+
+ status = "okay";
+};