diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 805 |
1 files changed, 758 insertions, 47 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 30c94fd4fe61..4afbab570ca1 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -5,14 +5,27 @@ /dts-v1/; +/* PM7250B is configured to use SID2/3 */ +#define PM7250B_SID 2 +#define PM7250B_SID1 3 + +/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */ +#define PMK8350_SID 6 + +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/usb/pd.h> #include "sm7225.dtsi" #include "pm6150l.dtsi" #include "pm6350.dtsi" #include "pm7250b.dtsi" +#include "pmk8350.dtsi" / { model = "Fairphone 4"; @@ -20,11 +33,12 @@ chassis-type = "handset"; /* required for bootloader to select correct board */ - qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,msm-id = <459 0x10000>; qcom,board-id = <8 32>; aliases { serial0 = &uart9; + serial1 = &uart1; }; chosen { @@ -56,6 +70,14 @@ }; }; + /* Dummy regulator until PM6150L has LCDB VSP/VSN support */ + lcdb_dummy: regulator-lcdb-dummy { + compatible = "regulator-fixed"; + regulator-name = "lcdb_dummy"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + }; + reserved-memory { /* * The rmtfs memory region in downstream is 'dynamically allocated' @@ -68,14 +90,26 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; }; + msm_therm_sensor: thermal-sensor-msm { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>; + io-channel-names = "sensor-channel"; + }; + + rear_cam_sensor: thermal-sensor-rear-cam { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&pm6150l_adc ADC5_GPIO2_100K_PU>; + io-channel-names = "sensor-channel"; + }; + thermal-zones { chg-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -88,8 +122,6 @@ }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -100,220 +132,373 @@ }; }; }; + + pa0-thermal { + thermal-sensors = <&pm6150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pa1-thermal { + thermal-sensors = <&pm6150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + pm8008-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + thermal-sensors = <&pm6150l_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rear-cam-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&rear_cam_sensor>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rfc-flash-thermal { + thermal-sensors = <&pm6150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&msm_therm_sensor>; + + trips { + trip0 { + temperature = <45000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <55000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + xo-thermal { + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; }; }; &adsp { + firmware-name = "qcom/sm7225/fairphone4/adsp.mbn"; status = "okay"; - firmware-name = "qcom/sm7225/fairphone4/adsp.mdt"; }; &apps_rsc { - pm6350-rpmh-regulators { + regulators-0 { compatible = "qcom,pm6350-rpmh-regulators"; qcom,pmic-id = "a"; vreg_s1a: smps1 { + regulator-name = "vreg_s1a"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; }; vreg_s2a: smps2 { + regulator-name = "vreg_s2a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <2048000>; }; vreg_l2a: ldo2 { + regulator-name = "vreg_l2a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; regulator-min-microvolt = <352000>; regulator-max-microvolt = <801000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; regulator-min-microvolt = <1503000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; regulator-min-microvolt = <1710000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11a: ldo11 { + regulator-name = "vreg_l11a"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12a: ldo12 { + regulator-name = "vreg_l12a"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; regulator-min-microvolt = <570000>; regulator-max-microvolt = <650000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14a: ldo14 { + regulator-name = "vreg_l14a"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15a: ldo15 { + regulator-name = "vreg_l15a"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16a: ldo16 { + regulator-name = "vreg_l16a"; regulator-min-microvolt = <830000>; regulator-max-microvolt = <921000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18a: ldo18 { + regulator-name = "vreg_l18a"; regulator-min-microvolt = <788000>; regulator-max-microvolt = <1049000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l19a: ldo19 { + regulator-name = "vreg_l19a"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l20a: ldo20 { + regulator-name = "vreg_l20a"; regulator-min-microvolt = <530000>; regulator-max-microvolt = <801000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l21a: ldo21 { + regulator-name = "vreg_l21a"; regulator-min-microvolt = <751000>; regulator-max-microvolt = <825000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l22a: ldo22 { + regulator-name = "vreg_l22a"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; - pm6150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm6150l-rpmh-regulators"; qcom,pmic-id = "e"; vreg_s8e: smps8 { + regulator-name = "vreg_s8e"; regulator-min-microvolt = <313000>; regulator-max-microvolt = <1395000>; }; vreg_l1e: ldo1 { + regulator-name = "vreg_l1e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2e: ldo2 { + regulator-name = "vreg_l2e"; regulator-min-microvolt = <1170000>; regulator-max-microvolt = <1305000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3e: ldo3 { + regulator-name = "vreg_l3e"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1299000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4e: ldo4 { + regulator-name = "vreg_l4e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5e: ldo5 { + regulator-name = "vreg_l5e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2950000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7e: ldo7 { + regulator-name = "vreg_l7e"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9e: ldo9 { + regulator-name = "vreg_l9e"; regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10e: ldo10 { + regulator-name = "vreg_l10e"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11e: ldo11 { + regulator-name = "vreg_l11e"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3401000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_bob: bob { + regulator-name = "vreg_bob"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <5492000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; @@ -322,51 +507,313 @@ }; }; +&cci0 { + status = "okay"; +}; + +&cci0_i2c0 { + /* IMX582 @ 0x1a */ +}; + +&cci0_i2c1 { + /* IMX582 @ 0x1a */ +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + /* IMX576 @ 0x10 */ +}; + &cdsp { + firmware-name = "qcom/sm7225/fairphone4/cdsp.mbn"; status = "okay"; - firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; }; -&i2c10 { +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sm7225/fairphone4/a615_zap.mbn"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + /* ST21NFCD NFC @ 8 */ + /* VL53L3 ToF @ 29 */ + /* AW88264A amplifier @ 34 */ + /* AW88264A amplifier @ 35 */ +}; + +&i2c8 { + clock-frequency = <400000>; status = "okay"; + + /* HX83112A touchscreen @ 48 */ +}; + +&i2c10 { clock-frequency = <400000>; + status = "okay"; + + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupts-extended = <&tlmm 59 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s8e>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_s2a>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_default>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1p: ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2p: ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3p: ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + }; + + vreg_l4p: ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2904000>; + }; - haptics@5a { - compatible = "awinic,aw8695"; - reg = <0x5a>; - interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>; + vreg_l5p: ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l6p: ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l7p: ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3140000>; + }; + }; + }; - awinic,f0-preset = <2350>; - awinic,f0-coefficient = <260>; - awinic,f0-calibration-percent = <7>; - awinic,drive-level = <125>; + /* PX8618 @ 26 */ + /* SMB1395 PMIC @ 34 */ + /* awinic,aw8695 @ 5a */ +}; - awinic,f0-detection-play-time = <5>; - awinic,f0-detection-wait-time = <3>; - awinic,f0-detection-repeat = <2>; - awinic,f0-detection-trace = <15>; +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&pil_ipa_fw_mem>; + firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mbn"; + status = "okay"; +}; - awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>; - awinic,tset = /bits/ 8 <0x12>; - awinic,r-spare = /bits/ 8 <0x68>; +&mdss { + status = "okay"; +}; - awinic,bemf-upper-threshold = <4104>; - awinic,bemf-lower-threshold = <1016>; +&mdss_dsi0 { + vdda-supply = <&vreg_l22a>; + status = "okay"; + + panel@0 { + compatible = "djn,9a-3r063-1102b"; + reg = <0>; + + backlight = <&pm6150l_wled>; + reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>; + + vdd1-supply = <&vreg_l1e>; + vsn-supply = <&lcdb_dummy>; + vsp-supply = <&lcdb_dummy>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; }; }; +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l18a>; + status = "okay"; +}; + &mpss { + firmware-name = "qcom/sm7225/fairphone4/modem.mbn"; status = "okay"; - firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; }; -&pm6150l_wled { +&pm6150l_adc { + pinctrl-0 = <&pm6150l_adc_default>; + pinctrl-names = "default"; + + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + label = "pa_therm1"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + label = "msm_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + label = "pa_therm0"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@53 { + reg = <ADC5_GPIO2_100K_PU>; + label = "rear_cam_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@54 { + reg = <ADC5_GPIO3_100K_PU>; + label = "rear_cam_flash_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@55 { + reg = <ADC5_GPIO4_100K_PU>; + label = "quiet_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; +}; + +&pm6150l_adc_tm { + status = "okay"; + + pa-therm1@0 { + reg = <0>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + pa-therm0@1 { + reg = <1>; + io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + rear-cam-flash-therm@2 { + reg = <2>; + io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; + + quiet-therm@3 { + reg = <3>; + io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; +}; + +&pm6150l_flash { status = "okay"; + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>; + led-max-microamp = <180000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>; + led-max-microamp = <180000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pm6150l_gpios { + pm6150l_adc_default: adc-default-state { + pins = "gpio6", "gpio7", "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + +&pm6150l_wled { qcom,switching-freq = <800>; qcom,current-limit-microamp = <20000>; qcom,num-strings = <2>; + + status = "okay"; }; &pm6350_gpios { @@ -380,12 +827,12 @@ }; &pm6350_resin { - status = "okay"; linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; }; &pm7250b_adc { - adc-chan@4d { + channel@4d { reg = <ADC5_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -393,7 +840,7 @@ label = "charger_skin_therm"; }; - adc-chan@4f { + channel@4f { reg = <ADC5_AMUX_THM3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -420,34 +867,290 @@ }; }; +&pm7250b_typec { + vdd-pdphy-supply = <&vreg_l3a>; + + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + /* + * Disable USB Power Delivery for now, seems to need extra work + * to support role switching while also letting the battery + * charge still - without charger driver + */ + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm7250b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; + }; + }; + + port@1 { + reg = <1>; + pm7250b_ss_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + }; + }; +}; + +&pm7250b_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1500000>; + status = "okay"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,hw-settle-time-us = <200>; + qcom,ratiometric; + }; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pmk8350_vadc { + channel@644 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "xo_therm"; + }; +}; + +&q6asmdai { + dai@0 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; +}; + +&qup_uart1_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart1_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart1_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart1_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qupv3_id_0 { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + vmmc-supply = <&vreg_l9e>; + vqmmc-supply = <&vreg_l6e>; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&sound { + compatible = "fairphone,fp4-sndcard"; + model = "Fairphone 4"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + usb-dai-link { + link-name = "USB Playback"; + + codec { + sound-dai = <&q6usbdai USB_RX>; + }; + + cpu { + sound-dai = <&q6afedai USB_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; +}; + &tlmm { gpio-reserved-ranges = <13 4>, <56 2>; + + qup_uart1_sleep_cts: qup-uart1-sleep-cts-state { + pins = "gpio61"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart1_sleep_rts: qup-uart1-sleep-rts-state { + pins = "gpio62"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart1_sleep_rx: qup-uart1-sleep-rx-state { + pins = "gpio64"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart1_sleep_tx: qup-uart1-sleep-tx-state { + pins = "gpio63"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + pm8008_default: pm8008-default-state { + int-pins { + pins = "gpio59"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-n-pins { + pins = "gpio58"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; }; -&uart9 { +&uart1 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 64 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart1_sleep_cts>, <&qup_uart1_sleep_rts>, <&qup_uart1_sleep_tx>, <&qup_uart1_sleep_rx>; + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&vreg_l11a>; + vddxo-supply = <&vreg_l7a>; + vddrf-supply = <&vreg_l2e>; + vddch0-supply = <&vreg_l10e>; + swctrl-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + + max-speed = <3200000>; + }; }; -&ufs_mem_hc { +&uart9 { status = "okay"; +}; +&ufs_mem_hc { reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l7e>; vcc-max-microamp = <800000>; vccq2-supply = <&vreg_l12a>; vccq2-max-microamp = <800000>; -}; -&ufs_mem_phy { status = "okay"; +}; +&ufs_mem_phy { vdda-phy-supply = <&vreg_l18a>; vdda-pll-supply = <&vreg_l22a>; + + status = "okay"; }; &usb_1 { @@ -456,30 +1159,38 @@ &usb_1_dwc3 { maximum-speed = "super-speed"; - dr_mode = "peripheral"; + dr_mode = "otg"; }; -&usb_1_hsphy { - status = "okay"; +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm7250b_hs_in>; +}; +&usb_1_hsphy { vdd-supply = <&vreg_l18a>; vdda-pll-supply = <&vreg_l2a>; vdda-phy-dpdm-supply = <&vreg_l3a>; -}; -&usb_1_qmpphy { status = "okay"; +}; +&usb_1_qmpphy { vdda-phy-supply = <&vreg_l22a>; vdda-pll-supply = <&vreg_l16a>; -}; -&wifi { status = "okay"; +}; +&usb_1_qmpphy_out { + remote-endpoint = <&pm7250b_ss_in>; +}; + +&wifi { vdd-0.8-cx-mx-supply = <&vreg_l4a>; vdd-1.8-xo-supply = <&vreg_l7a>; vdd-1.3-rfa-supply = <&vreg_l2e>; vdd-3.3-ch0-supply = <&vreg_l10e>; vdd-3.3-ch1-supply = <&vreg_l11e>; + + status = "okay"; }; |