summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8150-hdk.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/sm8150-hdk.dts267
1 files changed, 259 insertions, 8 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index 3331ee957d64..0339a572f34d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -7,6 +7,7 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/usb/pd.h>
#include "sm8150.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
@@ -15,6 +16,7 @@
/ {
model = "Qualcomm Technologies, Inc. SM8150 HDK";
compatible = "qcom,sm8150-hdk", "qcom,sm8150";
+ chassis-type = "embedded";
aliases {
serial0 = &uart2;
@@ -53,10 +55,21 @@
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
};
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&lt9611_out>;
+ };
+ };
+ };
};
&apps_rsc {
- pm8150-rpmh-regulators {
+ regulators-0 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
@@ -126,8 +139,6 @@
vdda_sp_sensor:
vdda_ufs_2ln_core_1:
vdda_ufs_2ln_core_2:
- vdda_usb_ss_dp_core_1:
- vdda_usb_ss_dp_core_2:
vdda_qlink_lv:
vdda_qlink_lv_ck:
vreg_l5a_0p875: ldo5 {
@@ -209,9 +220,15 @@
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+
+ vreg_l18a_0p8: ldo18 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
};
- pm8150l-rpmh-regulators {
+ regulators-1 {
compatible = "qcom,pm8150l-rpmh-regulators";
qcom,pmic-id = "c";
@@ -324,7 +341,7 @@
};
};
- pm8009-rpmh-regulators {
+ regulators-2 {
compatible = "qcom,pm8009-rpmh-regulators";
qcom,pmic-id = "f";
@@ -358,10 +375,207 @@
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
&gpu {
status = "okay";
};
+&i2c4 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ typec-mux@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+
+ interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc-supply = <&vreg_bob>;
+ mode-switch;
+ orientation-switch;
+
+ port {
+ fsa4480_sbu_mux: endpoint {
+ remote-endpoint = <&pm8150b_typec_sbu_out>;
+ };
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ lt9611_codec: hdmi-bridge@3b {
+ compatible = "lontium,lt9611";
+ reg = <0x3b>;
+ #sound-dai-cells = <1>;
+
+ interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_s4a_1p8>;
+ vcc-supply = <&vreg_bob>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lt9611_irq_pin>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lt9611_a: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lt9611_b: endpoint {
+ remote-endpoint = <&mdss_dsi1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lt9611_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp {
+ status = "okay";
+};
+
+&mdss_dp_out {
+ data-lanes = <0 1>;
+};
+
+&mdss_dsi0 {
+ status = "okay";
+ vdda-supply = <&vreg_l3c_1p2>;
+
+ qcom,dual-dsi-mode;
+ qcom,master-dsi;
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&lt9611_a>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vreg_l5a_0p875>;
+};
+
+&mdss_dsi1 {
+ vdda-supply = <&vreg_l3c_1p2>;
+
+ qcom,dual-dsi-mode;
+
+ /* DSI1 is slave, so use DSI0 clocks */
+ assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+ status = "okay";
+};
+
+&mdss_dsi1_out {
+ remote-endpoint = <&lt9611_b>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi1_phy {
+ vdds-supply = <&vreg_l5a_0p875>;
+ status = "okay";
+};
+
+&pm8150b_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
+ status = "okay";
+};
+
+&pm8150b_typec {
+ status = "okay";
+
+ vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "source";
+ data-role = "dual";
+ self-powered;
+
+ source-pdos = <PDO_FIXED(5000, 3000,
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DATA_SWAP)>;
+
+ altmodes {
+ displayport {
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0x00001c46>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pm8150b_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pm8150b_typec_mux_in: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pm8150b_typec_sbu_out: endpoint {
+ remote-endpoint = <&fsa4480_sbu_mux>;
+ };
+ };
+ };
+ };
+};
+
+&pon {
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+};
+
&pon_pwrkey {
status = "okay";
};
@@ -372,6 +586,10 @@
linux,code = <KEY_VOLUMEDOWN>;
};
+&qupv3_id_0 {
+ status = "okay";
+};
+
&qupv3_id_1 {
status = "okay";
};
@@ -388,6 +606,11 @@
firmware-name = "qcom/sm8150/cdsp.mbn";
};
+&remoteproc_mpss {
+ firmware-name = "qcom/sm8150/modem.mbn";
+ status = "okay";
+};
+
&remoteproc_slpi {
status = "okay";
@@ -396,6 +619,13 @@
&tlmm {
gpio-reserved-ranges = <0 4>, <126 4>;
+
+ lt9611_irq_pin: lt9611-irq-state {
+ pins = "gpio9";
+ function = "gpio";
+ bias-disable;
+ };
+
};
&uart2 {
@@ -439,13 +669,18 @@
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
- vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+ vdda-pll-supply = <&vreg_l18a_0p8>;
+ orientation-switch;
+};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pm8150b_typec_mux_in>;
};
&usb_2_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l3c_1p2>;
- vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+ vdda-pll-supply = <&vreg_l5a_0p875>;
};
&usb_1 {
@@ -457,9 +692,25 @@
};
&usb_1_dwc3 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pm8150b_hs_in>;
};
&usb_2_dwc3 {
dr_mode = "host";
};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+
+ qcom,calibration-variant = "Qualcomm_sm8150hdk";
+};
generated by cgit (git 2.34.1) at 2026-01-01 03:36:30 +0000