summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8250-mtp.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/sm8250-mtp.dts146
1 files changed, 70 insertions, 76 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index a102aa5efa32..51779b99176d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -18,19 +18,41 @@
/ {
model = "Qualcomm Technologies, Inc. SM8250 MTP";
compatible = "qcom,sm8250-mtp", "qcom,sm8250";
+ chassis-type = "handset";
aliases {
serial0 = &uart12;
};
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9380-codec";
+
+ reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-rxtx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ #sound-dai-cells = <1>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
thermal-zones {
camera-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 0>;
trips {
@@ -43,8 +65,6 @@
};
conn-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pm8150b_adc_tm 0>;
trips {
@@ -57,8 +77,6 @@
};
mmw-pa1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 2>;
trips {
@@ -71,8 +89,6 @@
};
mmw-pa2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 2>;
trips {
@@ -85,8 +101,6 @@
};
skin-msm-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pm8150l_adc_tm 1>;
trips {
@@ -99,8 +113,6 @@
};
skin-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 1>;
trips {
@@ -113,8 +125,6 @@
};
xo-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pm8150_adc_tm 0>;
trips {
@@ -164,7 +174,7 @@
};
&apps_rsc {
- pm8150-rpmh-regulators {
+ regulators-0 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
@@ -298,7 +308,7 @@
};
};
- pm8150l-rpmh-regulators {
+ regulators-1 {
compatible = "qcom,pm8150l-rpmh-regulators";
qcom,pmic-id = "c";
@@ -409,7 +419,7 @@
};
};
- pm8009-rpmh-regulators {
+ regulators-2 {
compatible = "qcom,pm8009-rpmh-regulators";
qcom,pmic-id = "f";
@@ -474,11 +484,10 @@
&gpu {
status = "okay";
+};
- zap-shader {
- memory-region = <&gpu_mem>;
- firmware-name = "qcom/sm8250/a650_zap.mbn";
- };
+&gpu_zap_shader {
+ firmware-name = "qcom/sm8250/a650_zap.mbn";
};
&i2c1 {
@@ -502,22 +511,25 @@
};
&pm8150_adc {
- xo-therm@4c {
+ channel@4c {
reg = <ADC5_XO_THERM_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
+ label = "xo_therm";
};
- skin-therm@4d {
+ channel@4d {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
+ label = "skin_therm";
};
- pa-therm1@4e {
+ channel@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
+ label = "pa_therm1";
};
};
@@ -547,10 +559,11 @@
};
&pm8150b_adc {
- conn-therm@4f {
+ channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
+ label = "conn_therm";
};
};
@@ -591,25 +604,33 @@
};
&pm8150l_adc {
- camera-flash-therm@4d {
+ channel@4d {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
+ label = "camera_flash_therm";
};
- skin-msm-therm@4e {
+ channel@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
+ label = "skin_msm_therm";
};
- pa-therm2@4f {
+ channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
+ label = "pa_therm2";
};
};
+&pon {
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -631,27 +652,6 @@
firmware-name = "qcom/sm8250/slpi.mbn";
};
-&soc {
- wcd938x: codec {
- compatible = "qcom,wcd9380-codec";
- #sound-dai-cells = <1>;
- reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
- vdd-buck-supply = <&vreg_s4a_1p8>;
- vdd-rxtx-supply = <&vreg_s4a_1p8>;
- vdd-io-supply = <&vreg_s4a_1p8>;
- vdd-mic-bias-supply = <&vreg_bob>;
- qcom,micbias1-microvolt = <1800000>;
- qcom,micbias2-microvolt = <1800000>;
- qcom,micbias3-microvolt = <1800000>;
- qcom,micbias4-microvolt = <1800000>;
- qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
- qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
- qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
- qcom,rx-device = <&wcd_rx>;
- qcom,tx-device = <&wcd_tx>;
- };
-};
-
&sound {
compatible = "qcom,sm8250-sndcard";
model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";
@@ -757,19 +757,21 @@
};
&swr0 {
- left_spkr: wsa8810-right@0,3{
+ status = "okay";
+
+ left_spkr: speaker@0,3 {
compatible = "sdw10217211000";
reg = <0 3>;
- powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrLeft";
#sound-dai-cells = <0>;
};
- right_spkr: wsa8810-left@0,4{
+ right_spkr: speaker@0,4 {
compatible = "sdw10217211000";
reg = <0 4>;
- powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrRight";
#sound-dai-cells = <0>;
@@ -799,31 +801,19 @@
&tlmm {
gpio-reserved-ranges = <28 4>, <40 4>;
- wcd938x_reset_default: wcd938x_reset_default {
- mux {
- pins = "gpio32";
- function = "gpio";
- };
-
- config {
- pins = "gpio32";
- drive-strength = <16>;
- output-high;
- };
+ wcd938x_reset_default: wcd938x-reset-default-state {
+ pins = "gpio32";
+ function = "gpio";
+ drive-strength = <16>;
+ output-high;
};
- wcd938x_reset_sleep: wcd938x_reset_sleep {
- mux {
- pins = "gpio32";
- function = "gpio";
- };
-
- config {
- pins = "gpio32";
- drive-strength = <16>;
- bias-disable;
- output-low;
- };
+ wcd938x_reset_sleep: wcd938x-reset-sleep-state {
+ pins = "gpio32";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
};
};
@@ -902,3 +892,7 @@
&venus {
status = "okay";
};
+
+&wsamacro {
+ status = "okay";
+};
generated by cgit (git 2.34.1) at 2025-12-31 20:12:20 +0000