diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts | 772 |
1 files changed, 772 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts new file mode 100644 index 000000000000..6955eafd8d6a --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts @@ -0,0 +1,772 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4H ES3.0 Sparrow Hawk board + * + * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org> + */ +/* + * DA7212 Codec settings + * + * for Playback + * > amixer set "Headphone" 40% + * > amixer set "Headphone" on + * > amixer set "Mixout Left DAC Left" on + * > amixer set "Mixout Right DAC Right" on + * > aplay xxx.wav + * + * for Capture (Aux/Mic) + * + * on/off (B) + * CONN3 (HeadSet) ---+----> MSIOF1 + * | + * CONN4 AUX ---------+ on/off (A) + * + * > amixer set "Mixin PGA" on + * > amixer set "Mixin PGA" 50% + * > amixer set "ADC" on + * > amixer set "ADC" 80% + * > amixer set "Aux" on ^ + * > amixer set "Aux" 80% | (A) + * > amixer set "Mixin Left Aux Left" on | + * > amixer set "Mixin Right Aux Right" on v + * > amixer set "Mic 1" on ^ + * > amixer set "Mic 1" 80% | (B) + * > amixer set "Mixin Left Mic 1" on | + * > amixer set "Mixin Right Mic 1" on v + * > arecord -f cd xxx.wav + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> + +#include "r8a779g3.dtsi" + +/ { + model = "Retronix Sparrow Hawk board based on r8a779g3"; + compatible = "retronix,sparrow-hawk", "renesas,r8a779g3", + "renesas,r8a779g0"; + + aliases { + ethernet0 = &avb0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &hscif0; + serial1 = &hscif1; + serial2 = &hscif3; + spi0 = &rpc; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:921600n8"; + }; + + /* Page 31 / FAN */ + fan: pwm-fan { + pinctrl-0 = <&irq4_pins>; + pinctrl-names = "default"; + compatible = "pwm-fan"; + #cooling-cells = <2>; + interrupts-extended = <&intc_ex 4 IRQ_TYPE_EDGE_FALLING>; + /* + * The fan model connected to this device can be selected + * by user. Set "cooling-levels" DT property to single 255 + * entry to force the fan PWM into constant HIGH, which + * forces the fan to spin at maximum RPM, thus providing + * maximum cooling to this device and protection against + * misconfigured PWM duty cycle to the fan. + * + * User has to configure "pwms" and "pulses-per-revolution" + * DT properties according to fan datasheet first, and then + * extend "cooling-levels = <0 m n ... 255>" property to + * achieve proper fan control compatible with fan model + * installed by user. + */ + cooling-levels = <255>; + pulses-per-revolution = <2>; + pwms = <&pwm0 0 50000>; + }; + + /* + * Page 15 / LPDDR5 + * + * This configuration listed below is for the 8 GiB board variant + * with MT62F1G64D8EK-023 WT:C LPDDR5 part populated on the board. + * + * A variant with 16 GiB MT62F2G64D8EK-023 WT:C part populated on + * the board is automatically handled by the bootloader, which + * adjusts the correct DRAM size into the memory nodes below. + */ + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; + + /* Page 27 / DSI to Display */ + mini-dp-con { + compatible = "dp-connector"; + label = "CN6"; + type = "full-size"; + + port { + mini_dp_con_in: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* Page 27 / DSI to Display */ + sn65dsi86_refclk: clk-x9 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + + /* Page 30 / Audio_Codec */ + sound_card: sound { + compatible = "audio-graph-card2"; + links = <&msiof1_snd>; + }; + + /* Page 17 uSD-Slot */ + vcc_sdhi: regulator-vcc-sdhi { + compatible = "regulator-gpio"; + regulator-name = "SDHI VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio8 13 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 0>, <1800000 1>; + }; +}; + +&audio_clkin { + clock-frequency = <24576000>; +}; + +/* Page 22 / Ether_AVB0 */ +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&avb0_phy>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + avb0_phy: ethernet-phy@0 { /* KSZ9031RNXVB */ + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + /* AVB0_PHY_INT_V */ + interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>; + /* GP7_10/AVB0_RESETN_V */ + reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +/* Page 28 / CANFD_IF */ +&can_clk { + clock-frequency = <40000000>; +}; + +/* Page 28 / CANFD_IF */ +&canfd { + pinctrl-0 = <&canfd3_pins>, <&canfd4_pins>, <&can_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; + + channel3 { + status = "okay"; + }; + + channel4 { + status = "okay"; + }; +}; + +/* Page 27 / DSI to Display */ +&dsi1 { + status = "okay"; + + ports { + port@1 { + dsi1_out: endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +/* Page 27 / DSI to Display */ +&du { + status = "okay"; +}; + +/* Page 5 / R-Car V4H_INT_I2C */ +&extal_clk { /* X3 */ + clock-frequency = <16666666>; +}; + +/* Page 5 / R-Car V4H_INT_I2C */ +&extalr_clk { /* X2 */ + clock-frequency = <32768>; +}; + +/* Page 26 / 2230 Key M M.2 */ +&gpio4 { + /* 9FGV0441 nOE inputs 0 and 1 */ + pcie-m2-oe-hog { + gpio-hog; + gpios = <21 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "PCIe-CLK-nOE-M2"; + }; + + /* 9FGV0441 nOE inputs 2 and 3 */ + pcie-usb-oe-hog { + gpio-hog; + gpios = <22 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "PCIe-CLK-nOE-USB"; + }; +}; + +/* Page 23 / DEBUG */ +&hscif0 { /* FTDI ADBUS[3:0] */ + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + bootph-all; + + status = "okay"; +}; + +/* Page 23 / DEBUG */ +&hscif1 { /* FTDI BDBUS[3:0] */ + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; +}; + +/* Page 24 / UART */ +&hscif3 { /* CN7 pins 8 (TX) and 10 (RX) */ + pinctrl-0 = <&hscif3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +/* Page 24 / I2C SWITCH */ +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; + + mux@71 { + compatible = "nxp,pca9544"; /* TCA9544 */ + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <®_3p3v>; + + i2c0_mux0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + /* Page 27 / DSI to Display */ + bridge@2c { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + + vccio-supply = <®_1p8v>; + vpll-supply = <®_1p8v>; + vcca-supply = <®_1p2v>; + vcc-supply = <®_1p2v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&mini_dp_con_in>; + }; + }; + }; + }; + }; + + i2c0_mux1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* Page 30 / Audio_Codec */ + codec@1a { + compatible = "dlg,da7212"; + + #sound-dai-cells = <0>; + reg = <0x1a>; + + clocks = <&rcar_sound>; + clock-names = "mclk"; + + VDDA-supply = <®_1p8v>; + VDDMIC-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + port { + da7212_endpoint: endpoint { + bitclock-master; + frame-master; + remote-endpoint = <&msiof1_snd_endpoint>; + }; + }; + }; + }; + + i2c0_mux2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c0_mux3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* Page 29 / CSI_IF_CN / CAM_CN0 */ +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; +}; + +/* Page 29 / CSI_IF_CN / CAM_CN1 */ +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; +}; + +/* Page 31 / IO_CN */ +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; +}; + +/* Page 31 / IO_CN */ +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; +}; + +/* Page 18 / POWER_CORE and Page 19 / POWER_PMIC */ +&i2c5 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&i2c5_pins>; + pinctrl-names = "default"; +}; + +/* Page 17 uSD-Slot */ +&mmc0 { + pinctrl-0 = <&sd_pins>; + pinctrl-1 = <&sd_uhs_pins>; + pinctrl-names = "default", "state_uhs"; + bus-width = <4>; + cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; /* SD_CD */ + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vcc_sdhi>; + status = "okay"; +}; + +&msiof1 { + pinctrl-0 = <&msiof1_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* ignore DT warning */ + /delete-property/#address-cells; + /delete-property/#size-cells; + + msiof1_snd: port { + msiof1_snd_endpoint: endpoint { + remote-endpoint = <&da7212_endpoint>; + }; + }; +}; + +/* Page 26 / 2230 Key M M.2 */ +&pcie0_clkref { + clock-frequency = <100000000>; +}; + +&pciec0 { + reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* Page 25 / PCIe to USB */ +&pcie1_clkref { + clock-frequency = <100000000>; +}; + +&pciec1 { + /* uPD720201 is PCIe Gen2 x1 device */ + num-lanes = <1>; + reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + /* Page 22 / Ether_AVB0 */ + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", + "avb0_txcrefclk"; + function = "avb0"; + }; + + pins-mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins-mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + + }; + + /* Page 28 / CANFD_IF */ + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + + /* Page 28 / CANFD_IF */ + canfd3_pins: canfd3 { + groups = "canfd3_data"; + function = "canfd3"; + }; + + /* Page 28 / CANFD_IF */ + canfd4_pins: canfd4 { + groups = "canfd4_data"; + function = "canfd4"; + }; + + /* Page 23 / DEBUG */ + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + /* Page 23 / DEBUG */ + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + + /* Page 24 / UART */ + hscif3_pins: hscif3 { + groups = "hscif3_data_a"; + function = "hscif3"; + }; + + /* Page 24 / I2C SWITCH */ + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + /* Page 29 / CSI_IF_CN / CAM_CN0 */ + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + /* Page 29 / CSI_IF_CN / CAM_CN1 */ + i2c2_pins: i2c2 { + groups = "i2c2"; + function = "i2c2"; + }; + + /* Page 31 / IO_CN */ + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + + /* Page 31 / IO_CN */ + i2c4_pins: i2c4 { + groups = "i2c4"; + function = "i2c4"; + }; + + /* Page 18 / POWER_CORE */ + i2c5_pins: i2c5 { + groups = "i2c5"; + function = "i2c5"; + }; + + /* Page 27 / DSI to Display */ + irq0_pins: irq0 { + groups = "intc_ex_irq0_a"; + function = "intc_ex"; + }; + + /* Page 31 / FAN */ + irq4_pins: irq4 { + groups = "intc_ex_irq4_b"; + function = "intc_ex"; + }; + + /* Page 31 / FAN */ + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; + + /* Page 31 / CN7 pin 12 */ + pwm1_pins: pwm1 { + groups = "pwm1_b"; + function = "pwm1"; + }; + + /* Page 31 / CN7 pin 32 */ + pwm6_pins: pwm6 { + groups = "pwm6"; + function = "pwm6"; + }; + + /* Page 31 / CN7 pin 33 */ + pwm7_pins: pwm7 { + groups = "pwm7"; + function = "pwm7"; + }; + + /* Page 16 / QSPI_FLASH */ + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + bootph-all; + }; + + /* Page 6 / SCIF_CLK_SOC_V */ + scif_clk_pins: scif-clk { + groups = "scif_clk"; + function = "scif_clk"; + }; + + /* Page 17 uSD-Slot */ + sd_pins: sd { + groups = "mmc_data4", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + + /* Page 17 uSD-Slot */ + sd_uhs_pins: sd-uhs { + groups = "mmc_data4", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + /* Page 30 / Audio_Codec */ + msiof1_pins: sound { + groups = "msiof1_clk", "msiof1_sync", "msiof1_txd", "msiof1_rxd"; + function = "msiof1"; + }; + + /* Page 30 / Audio_Codec */ + sound_clk_pins: sound-clk { + groups = "audio_clkin", "audio_clkout"; + function = "audio_clk"; + }; +}; + +/* Page 30 / Audio_Codec */ +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + /* It is used for ADG output as DA7212_MCLK */ + + /* audio_clkout */ + clock-frequency = <12288000>; /* 48 kHz groups */ + + status = "okay"; +}; + +/* Page 31 / FAN */ +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* Page 31 / CN7 pin 12 */ +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* Page 31 / CN7 pin 32 */ +&pwm6 { + pinctrl-0 = <&pwm6_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* Page 31 / CN7 pin 33 */ +&pwm7 { + pinctrl-0 = <&pwm7_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* Page 16 / QSPI_FLASH */ +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + bootph-all; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + bootph-all; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x0 0x1000000>; + read-only; + }; + + user@1000000 { + reg = <0x1000000 0x2f80000>; + }; + + env1@3f80000 { + reg = <0x3f80000 0x40000>; + }; + + env2@3fc0000 { + reg = <0x3fc0000 0x40000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +/* Page 6 / SCIF_CLK_SOC_V */ +&scif_clk { /* X12 */ + clock-frequency = <24000000>; +}; |