summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts')
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts686
1 files changed, 663 insertions, 23 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
index bc8616a56c03..4d890e0617af 100644
--- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
@@ -5,10 +5,32 @@
* Copyright (C) 2023 Renesas Electronics Corp.
* Copyright (C) 2024 Glider bv
*/
+/*
+ * [How to use Sound]
+ *
+ * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture
+ * at the same time. You need to switch the direction which is controlled
+ * by the GP0_01 pin via amixer.
+ *
+ * Playback (CN9500)
+ * > amixer set "MUX" "Playback" // for GP0_01
+ * > amixer set "DAC 1" 85%
+ * > aplay xxx.wav
+ *
+ * Capture (CN9501)
+ * > amixer set "MUX" "Capture" // for GP0_01
+ * > amixer set "Mic 1" 80%
+ * > amixer set "ADC 1" on
+ * > amixer set 'ADC 1' 80%
+ * > arecord xxx hoge.wav
+ */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
#include "r8a779h0.dtsi"
@@ -17,15 +39,91 @@
compatible = "renesas,gray-hawk-single", "renesas,r8a779h0";
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
serial0 = &hscif0;
+ serial1 = &hscif2;
ethernet0 = &avb0;
+ ethernet1 = &avb1;
+ ethernet2 = &avb2;
+ };
+
+ can_transceiver0: can-phy0 {
+ compatible = "nxp,tjr1443";
+ #phy-cells = <0>;
+ enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ max-bitrate = <5000000>;
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:921600n8";
};
+ sn65dsi86_refclk: clk-x6 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW47";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-2 {
+ gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW48";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-3 {
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW49";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+
+ led-2 {
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ led-3 {
+ gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ };
+ };
+
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
@@ -37,43 +135,212 @@
reg = <0x4 0x80000000 0x1 0x80000000>;
};
+ pcie_clk: clk-9fgv0841-pci {
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ #clock-cells = <0>;
+ };
+
+ mini-dp-con {
+ compatible = "dp-connector";
+ label = "CN5";
+ type = "mini";
+
+ port {
+ mini_dp_con_in: endpoint {
+ remote-endpoint = <&sn65dsi86_out0>;
+ };
+ };
+ };
+
+ reg_1p2v: regulator-1p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
};
reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound_mux: sound-mux {
+ compatible = "simple-audio-mux";
+ mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ state-labels = "Playback", "Capture";
+ };
+
+ sound_card: sound {
+ compatible = "audio-graph-card2";
+ label = "rcar-sound";
+ aux-devs = <&sound_mux>; // for GP0_01
+
+ links = <&rsnd_port>; // AK4619 Audio Codec
};
};
+&audio_clkin {
+ clock-frequency = <24576000>;
+};
+
&avb0 {
pinctrl-0 = <&avb0_pins>;
pinctrl-names = "default";
- phy-handle = <&phy0>;
+ phy-handle = <&avb0_phy>;
tx-internal-delay-ps = <2000>;
status = "okay";
- phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-id0022.1622",
- "ethernet-phy-ieee802.3-c22";
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio7>;
- interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ avb0_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&avb1 {
+ pinctrl-0 = <&avb1_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&avb1_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
+ reset-post-delay-us = <4000>;
+
+ avb1_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ interrupts-extended = <&gpio6 3 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
+&avb2 {
+ pinctrl-0 = <&avb2_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&avb2_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+ reset-post-delay-us = <4000>;
+
+ avb2_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ interrupts-extended = <&gpio5 4 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&can_clk {
+ clock-frequency = <40000000>;
+};
+
+&canfd {
+ pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ phys = <&can_transceiver0>;
+ };
+
+ channel1 {
+ status = "okay";
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96724_out0>;
+ };
+ };
+ };
+};
+
+&csi41 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi41_in: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96724_out1>;
+ };
+ };
+ };
+};
+
+&dsi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ dsi0_out: endpoint {
+ remote-endpoint = <&sn65dsi86_in0>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+};
+
+&du {
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
@@ -82,9 +349,27 @@
clock-frequency = <32768>;
};
+&gpio1 {
+ audio-power-hog {
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "Audio-Power";
+ };
+};
+
&hscif0 {
pinctrl-0 = <&hscif0_pins>;
pinctrl-names = "default";
+ bootph-all;
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&hscif2 {
+ pinctrl-0 = <&hscif2_pins>;
+ pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
@@ -97,6 +382,30 @@
status = "okay";
clock-frequency = <400000>;
+ io_expander_a: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ io_expander_b: gpio@21 {
+ compatible = "onnn,pca9654";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ io_expander_c: gpio@22 {
+ compatible = "onnn,pca9654";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
eeprom@50 {
compatible = "rohm,br24g01", "atmel,24c01";
label = "cpu-board";
@@ -126,6 +435,128 @@
};
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ bridge@2c {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
+ compatible = "ti,sn65dsi86";
+ reg = <0x2c>;
+
+ clocks = <&sn65dsi86_refclk>;
+ clock-names = "refclk";
+
+ interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+
+ vccio-supply = <&reg_1p8v>;
+ vpll-supply = <&reg_1p8v>;
+ vcca-supply = <&reg_1p2v>;
+ vcc-supply = <&reg_1p2v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ sn65dsi86_in0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ sn65dsi86_out0: endpoint {
+ remote-endpoint = <&mini_dp_con_in>;
+ };
+ };
+ };
+ };
+
+ gmsl0: gmsl-deserializer@4e {
+ compatible = "maxim,max96724";
+ reg = <0x4e>;
+ enable-gpios = <&io_expander_b 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96724_out0: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+ };
+
+ gmsl1: gmsl-deserializer@4f {
+ compatible = "maxim,max96724";
+ reg = <0x4f>;
+ enable-gpios = <&io_expander_c 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96724_out1: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi41_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ codec@10 {
+ compatible = "asahi-kasei,ak4619";
+ reg = <0x10>;
+
+ clocks = <&rcar_sound>;
+ clock-names = "mclk";
+
+ #sound-dai-cells = <0>;
+ port {
+ ak4619_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint>;
+ };
+ };
+ };
+};
+
+&isp0 {
+ status = "okay";
+};
+
+&isp1 {
+ status = "okay";
+};
+
&mmc0 {
pinctrl-0 = <&mmc_pins>;
pinctrl-1 = <&mmc_pins>;
@@ -143,8 +574,20 @@
status = "okay";
};
+&pcie0_clkref {
+ compatible = "gpio-gate-clock";
+ clocks = <&pcie_clk>;
+ enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ /delete-property/ clock-frequency;
+};
+
+&pciec0 {
+ reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&pfc {
- pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>;
pinctrl-names = "default";
avb0_pins: avb0 {
@@ -165,16 +608,106 @@
};
};
+ avb1_pins: avb1 {
+ mux {
+ groups = "avb1_link", "avb1_mdio", "avb1_rgmii",
+ "avb1_txcrefclk";
+ function = "avb1";
+ };
+
+ link {
+ groups = "avb1_link";
+ bias-disable;
+ };
+
+ mdio {
+ groups = "avb1_mdio";
+ drive-strength = <24>;
+ bias-disable;
+ };
+
+ rgmii {
+ groups = "avb1_rgmii";
+ drive-strength = <24>;
+ bias-disable;
+ };
+ };
+
+ avb2_pins: avb2 {
+ mux {
+ groups = "avb2_link", "avb2_mdio", "avb2_rgmii",
+ "avb2_txcrefclk";
+ function = "avb2";
+ };
+
+ link {
+ groups = "avb2_link";
+ bias-disable;
+ };
+
+ mdio {
+ groups = "avb2_mdio";
+ drive-strength = <24>;
+ bias-disable;
+ };
+
+ rgmii {
+ groups = "avb2_rgmii";
+ drive-strength = <24>;
+ bias-disable;
+ };
+ };
+
+ can_clk_pins: can-clk {
+ groups = "can_clk";
+ function = "can_clk";
+ };
+
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data";
+ function = "canfd0";
+ };
+
+ canfd1_pins: canfd1 {
+ groups = "canfd1_data";
+ function = "canfd1";
+ };
+
hscif0_pins: hscif0 {
groups = "hscif0_data", "hscif0_ctrl";
function = "hscif0";
};
+ hscif2_pins: hscif2 {
+ groups = "hscif2_data", "hscif2_ctrl";
+ function = "hscif2";
+ };
+
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
};
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ i2c3_pins: i2c3 {
+ groups = "i2c3";
+ function = "i2c3";
+ };
+
+ irq0_pins: irq0_pins {
+ groups = "intc_ex_irq0_a";
+ function = "intc_ex";
+ };
+
+ keys_pins: keys {
+ pins = "GP_5_0", "GP_5_1", "GP_5_2";
+ bias-pull-up;
+ };
+
mmc_pins: mmc {
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
function = "mmc";
@@ -190,6 +723,45 @@
groups = "scif_clk";
function = "scif_clk";
};
+
+ scif_clk2_pins: scif-clk2 {
+ groups = "scif_clk2";
+ function = "scif_clk2";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clkin", "audio_clkout";
+ function = "audio_clk";
+ };
+
+ sound_pins: sound {
+ groups = "ssi_ctrl", "ssi_data";
+ function = "ssi";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ /* audio_clkout */
+ clock-frequency = <12288000>;
+
+ ports {
+ rsnd_port: port {
+ rsnd_endpoint: endpoint {
+ remote-endpoint = <&ak4619_endpoint>;
+ bitclock-master;
+ frame-master;
+
+ /* see above [How to use Sound] */
+ playback = <&ssi0>;
+ capture = <&ssi0>;
+ };
+ };
+ };
};
&rpc {
@@ -228,3 +800,71 @@
&scif_clk {
clock-frequency = <24000000>;
};
+
+&scif_clk2 {
+ clock-frequency = <24000000>;
+};
+
+&vin00 {
+ status = "okay";
+};
+
+&vin01 {
+ status = "okay";
+};
+
+&vin02 {
+ status = "okay";
+};
+
+&vin03 {
+ status = "okay";
+};
+
+&vin04 {
+ status = "okay";
+};
+
+&vin05 {
+ status = "okay";
+};
+
+&vin06 {
+ status = "okay";
+};
+
+&vin07 {
+ status = "okay";
+};
+
+&vin08 {
+ status = "okay";
+};
+
+&vin09 {
+ status = "okay";
+};
+
+&vin10 {
+ status = "okay";
+};
+
+&vin11 {
+ status = "okay";
+};
+
+&vin12 {
+ status = "okay";
+};
+
+&vin13 {
+ status = "okay";
+};
+
+&vin14 {
+ status = "okay";
+};
+
+&vin15 {
+ status = "okay";
+};