diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts | 133 |
1 files changed, 133 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts new file mode 100644 index 000000000000..1f5e61a73c35 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G3E SMARC EVK board + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +/dts-v1/; + +/* Switch selection settings */ +#define SW_GPIO8_CAN0_STB 0 +#define SW_GPIO9_CAN1_STB 0 +#define SW_LCD_EN 0 +#define SW_PDM_EN 0 +#define SW_SD0_DEV_SEL 0 +#define SW_SDIO_M2E 0 + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h> +#include "r9a09g047e57.dtsi" +#include "rzg3e-smarc-som.dtsi" +#include "renesas-smarc2.dtsi" + +/ { + model = "Renesas SMARC EVK version 2 based on r9a09g047e57"; + compatible = "renesas,smarc2-evk", "renesas,rzg3e-smarcm", + "renesas,r9a09g047e57", "renesas,r9a09g047"; + + vqmmc_sd1_pvdd: regulator-vqmmc-sd1-pvdd { + compatible = "regulator-gpio"; + regulator-name = "SD1_PVDD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG3E_GPIO(1, 5) GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <3300000 0>, <1800000 1>; + }; +}; + +&canfd { + pinctrl-0 = <&canfd_pins>; + pinctrl-names = "default"; + +#if (!SW_PDM_EN) + channel1 { + status = "okay"; +#if (!SW_LCD_EN) && (SW_GPIO9_CAN1_STB) + phys = <&can_transceiver1>; +#endif + }; +#endif + +#if (!SW_LCD_EN) + channel4 { + status = "okay"; +#if (SW_GPIO8_CAN0_STB) + phys = <&can_transceiver0>; +#endif + }; +#endif +}; + +#if (!SW_LCD_EN) && (SW_GPIO8_CAN0_STB) +&can_transceiver0 { + standby-gpios = <&pinctrl RZG3E_GPIO(5, 4) GPIO_ACTIVE_HIGH>; + status = "okay"; +}; +#endif + +#if (!SW_LCD_EN) && (SW_GPIO9_CAN1_STB) +&can_transceiver1 { + standby-gpios = <&pinctrl RZG3E_GPIO(5, 5) GPIO_ACTIVE_HIGH>; + status = "okay"; +}; +#endif + +&pinctrl { + canfd_pins: canfd { + can1_pins: can1 { + pinmux = <RZG3E_PORT_PINMUX(L, 2, 3)>, /* RX */ + <RZG3E_PORT_PINMUX(L, 3, 3)>; /* TX */ + }; + + can4_pins: can4 { + pinmux = <RZG3E_PORT_PINMUX(5, 2, 3)>, /* RX */ + <RZG3E_PORT_PINMUX(5, 3, 3)>; /* TX */ + }; + }; + + scif_pins: scif { + pins = "SCIF_TXD", "SCIF_RXD"; + renesas,output-impedance = <1>; + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG3E_GPIO(1, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1-cd { + pinmux = <RZG3E_PORT_PINMUX(1, 4, 8)>; /* SD1CD */ + }; + + sd1-ctrl { + pinmux = <RZG3E_PORT_PINMUX(G, 0, 1)>, /* SD1CLK */ + <RZG3E_PORT_PINMUX(G, 1, 1)>; /* SD1CMD */ + }; + + sd1-data { + pinmux = <RZG3E_PORT_PINMUX(G, 2, 1)>, /* SD1DAT0 */ + <RZG3E_PORT_PINMUX(G, 3, 1)>, /* SD1DAT1 */ + <RZG3E_PORT_PINMUX(G, 4, 1)>, /* SD1DAT2 */ + <RZG3E_PORT_PINMUX(G, 5, 1)>; /* SD1DAT3 */ + }; + }; +}; + +&scif0 { + pinctrl-0 = <&scif_pins>; + pinctrl-names = "default"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vqmmc_sd1_pvdd>; +}; |