diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi | 63 |
1 files changed, 40 insertions, 23 deletions
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi index 5e4209d6fb42..3e8909a872e3 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi @@ -82,8 +82,7 @@ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; reg = <7>; - interrupt-parent = <&irqc>; - interrupts = <RZG2L_IRQ0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&irqc RZG2L_IRQ0 IRQ_TYPE_LEVEL_LOW>; rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; @@ -128,22 +127,33 @@ &pinctrl { eth0_pins: eth0 { - pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ - <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ - <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ - <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */ - <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ - <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ - <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ - <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ - <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ - <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ - <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ - <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ - <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ - <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ - <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */ - <RZG2L_PORT_PINMUX(0, 0, 1)>; /* IRQ0 */ + txc { + pinmux = <RZG2L_PORT_PINMUX(20, 0, 1)>; /* ET0_TXC */ + power-source = <1800>; + output-enable; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ + <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ + <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */ + power-source = <1800>; + }; + + irq { + pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* IRQ0 */ + }; }; gpio-sd0-pwr-en-hog { @@ -236,7 +246,7 @@ status = "okay"; flash@0 { - compatible = "micron,mt25qu512a", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; m25p,fast-read; spi-max-frequency = <50000000>; @@ -248,11 +258,18 @@ #address-cells = <1>; #size-cells = <1>; - boot@0 { - reg = <0x00000000 0x2000000>; - read-only; + partition@0 { + label = "bl2"; + reg = <0x00000000 0x0001d000>; }; - user@2000000 { + + partition@1d000 { /* fip is at offset 0x200 */ + label = "fip"; + reg = <0x0001d000 0x1fe3000>; + }; + + partition@2000000 { + label = "user"; reg = <0x2000000 0x2000000>; }; }; |