diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi | 172 |
1 files changed, 142 insertions, 30 deletions
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi index 6be25a8a28db..f3d7eff0d2f2 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi @@ -8,49 +8,50 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> -/* - * DIP-Switch SW1 setting on SoM - * 1 : High; 0: Low - * SW1-2 : SW_SD0_DEV_SEL (1: eMMC; 0: uSD) - * SW1-3 : SW_SCIF_CAN (1: CAN1; 0: SCIF1) - * SW1-4 : SW_RSPI_CAN (1: CAN1; 0: RSPI1) - * SW1-5 : SW_I2S0_I2S1 (1: I2S2 (HDMI audio); 0: I2S0) - * Please change below macros according to SW1 setting - */ - -#define SW_SD0_DEV_SEL 1 - -#define SW_SCIF_CAN 0 -#if (SW_SCIF_CAN) -/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */ -#define SW_RSPI_CAN 0 -#else -/* Please set SW_RSPI_CAN. Default value is 1 */ -#define SW_RSPI_CAN 1 -#endif - -#if (SW_SCIF_CAN && SW_RSPI_CAN) -#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing" -#endif - -#include "rzg2lc-smarc-som.dtsi" #include "rzg2lc-smarc-pinfunction.dtsi" #include "rz-smarc-common.dtsi" -/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */ -#define PMOD1_SER0 1 - / { aliases { serial1 = &scif1; i2c2 = &i2c2; }; + + osc1: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7535_out>; + }; + }; + }; + +#if (SW_I2S0_I2S1) + /delete-node/ sound; + + sound_card { + compatible = "audio-graph-card"; + label = "HDMI-Audio"; + dais = <&i2s2_port>; + }; +#endif }; #if (SW_SCIF_CAN || SW_RSPI_CAN) &canfd { pinctrl-0 = <&can1_pins>; - /delete-node/ channel@0; + + channel0 { + status = "disabled"; + }; }; #else &canfd { @@ -60,9 +61,75 @@ }; #endif +#if (!SW_I2S0_I2S1) &cpu_dai { sound-dai = <&ssi0>; }; +#endif + +&dsi { + status = "okay"; + + ports { + port@1 { + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; +}; + +&du { + status = "okay"; +}; + +&i2c1 { + adv7535: hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>; + + interrupts-extended = <&pinctrl RZG2L_GPIO(43, 1) IRQ_TYPE_EDGE_FALLING>; + clocks = <&osc1>; + clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + a2vdd-supply = <®_1p8v>; + v3p3-supply = <®_3p3v>; + v1p2-supply = <®_1p8v>; + + adi,dsi-lanes = <4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7535_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7535_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + +#if (SW_I2S0_I2S1) + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s2_cpu_endpoint>; + }; + }; +#endif + }; + }; +}; &i2c2 { pinctrl-0 = <&i2c2_pins>; @@ -76,8 +143,41 @@ #sound-dai-cells = <0>; reg = <0x1a>; }; + + versa3: clock-generator@68 { + compatible = "renesas,5p35023"; + reg = <0x68>; + #clock-cells = <1>; + clocks = <&x1>; + + renesas,settings = [ + 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf + 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 + 80 b0 45 c4 95 + ]; + + assigned-clocks = <&versa3 0>, <&versa3 1>, + <&versa3 2>, <&versa3 3>, + <&versa3 4>, <&versa3 5>; + assigned-clock-rates = <24000000>, <11289600>, + <11289600>, <12000000>, + <25000000>, <12288000>; + }; }; +#if PMOD_MTU3 +&mtu3 { + pinctrl-0 = <&mtu3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&spi1 { + status = "disabled"; +}; +#endif + /* * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board * SW1 should be at position 2->3 so that SER0_CTS# line is activated @@ -100,6 +200,18 @@ pinctrl-names = "default"; status = "okay"; + +#if (SW_I2S0_I2S1) + i2s2_port: port { + i2s2_cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + dai-format = "i2s"; + + bitclock-master = <&i2s2_cpu_endpoint>; + frame-master = <&i2s2_cpu_endpoint>; + }; + }; +#endif }; #if (SW_RSPI_CAN) |