diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/ulcb-kf.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 357 |
1 files changed, 328 insertions, 29 deletions
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 1b316d79df88..2a157d1efb3d 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -4,12 +4,96 @@ * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. + * + * Sample Audio settings: + * + * > amixer set "DVC Out" 1% + * > amixer set "DVC In" 20% + * + * // if you use xxxx-mix+split.dtsi + * > amixer -D hw:1 set "pcm3168a DAC1" 50% + * > amixer -D hw:1 set "pcm3168a DAC2" 50% + * > amixer -D hw:1 set "pcm3168a DAC3" 50% + * > amixer -D hw:1 set "pcm3168a DAC4" 50% + * + * // else + * > amixer -D hw:1 set "DAC1" 50% + * > amixer -D hw:1 set "DAC2" 50% + * > amixer -D hw:1 set "DAC3" 50% + * > amixer -D hw:1 set "DAC4" 50% */ - / { aliases { serial1 = &hscif0; serial2 = &scif1; + serial3 = &hscif1; + mmc2 = &sdhi3; + }; + + clksndsel: clksndsel { + #clock-cells = <0>; + compatible = "gpio-mux-clock"; + clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */ + select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>; + }; + + hdmi1-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con: endpoint { + remote-endpoint = <&adv7513_out>; + }; + }; + }; + + reg_t1p8v: regulator-t1p8v { + compatible = "regulator-fixed"; + regulator-name = "T1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + pcie_1v5: regulator-pcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "pcie-1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio_exp_77 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + pcie_3v3: regulator-pcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "pcie-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio_exp_77 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + wlan_en: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; }; }; @@ -25,6 +109,16 @@ status = "okay"; }; +&du { + ports { + port@0 { + du_out_rgb: endpoint { + remote-endpoint = <&adv7513_in>; + }; + }; + }; +}; + &ehci0 { dr_mode = "otg"; status = "okay"; @@ -38,78 +132,206 @@ status = "okay"; }; +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; +}; + &hsusb { dr_mode = "otg"; status = "okay"; }; &i2c2 { + i2cmux2: i2c-mux@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + + /* HDMIoSDA, HDMIoSCL */ + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + hdmi@3d { + compatible = "adi,adv7513"; + reg = <0x3d>; + + pinctrl-0 = <&hdmi1_pins>; + pinctrl-names = "default"; + + interrupts-extended = <&gpio2 14 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&cs2000>; + clock-names = "cec"; + + pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>; + + avdd-supply = <®_t1p8v>; + dvdd-supply = <®_t1p8v>; + pvdd-supply = <®_t1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_t1p8v>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7513_out: endpoint { + remote-endpoint = <&hdmi1_con>; + }; + }; + }; + }; + }; + + /* Audio_SDA, Audio_SCL */ + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + accelerometer@1d { + compatible = "st,lsm9ds0-imu"; + reg = <0x1d>; + + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; + }; + + pcm3168a: audio-codec@44 { + #sound-dai-cells = <0>; + compatible = "ti,pcm3168a"; + reg = <0x44>; + clocks = <&clksndsel>; + clock-names = "scki"; + + VDD1-supply = <®_3p3v>; + VDD2-supply = <®_3p3v>; + VCCAD1-supply = <®_5v>; + VCCAD2-supply = <®_5v>; + VCCDA1-supply = <®_5v>; + VCCDA2-supply = <®_5v>; + }; + + gyroscope@6b { + compatible = "st,lsm9ds0-gyro"; + reg = <0x6b>; + + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; + }; + }; + }; + + /* U11 */ gpio_exp_74: gpio@74 { compatible = "ti,tca9539"; reg = <0x74>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - interrupt-parent = <&gpio6>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + #interrupt-cells = <2>; + interrupts-extended = <&gpio6 8 IRQ_TYPE_EDGE_FALLING>; - hub_pwen { + audio-out-off-hog { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */ + output-high; + line-name = "Audio_Out_OFF"; + }; + + hub-pwen-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; line-name = "HUB pwen"; }; - hub_rst { + hub-rst-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_HIGH>; output-high; line-name = "HUB rst"; }; - otg_offvbusn { + otg-extlpn-hog { + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "OTG EXTLPn"; + }; + + otg-offvbusn-hog { gpio-hog; gpios = <8 GPIO_ACTIVE_HIGH>; output-low; line-name = "OTG OFFVBUSn"; }; - otg_extlpn { + sd-wifi-mux-hog { gpio-hog; - gpios = <9 GPIO_ACTIVE_HIGH>; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-low; /* Connect WL1837 */ + line-name = "SD WiFi mux"; + }; + + snd-rst-hog { + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */ output-high; - line-name = "OTG EXTLPn"; + line-name = "SND_RST"; }; }; + /* U5 */ gpio_exp_75: gpio@75 { compatible = "ti,tca9539"; reg = <0x75>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + #interrupt-cells = <2>; + interrupts-extended = <&gpio6 4 IRQ_TYPE_EDGE_FALLING>; }; +}; - i2cswitch2: i2c-switch@71 { +&i2c4 { + i2cmux4: i2c-mux@71 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x71>; - reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; -}; -&i2c4 { gpio_exp_76: gpio@76 { compatible = "ti,tca9539"; reg = <0x76>; gpio-controller; #gpio-cells = <2>; interrupt-controller; - interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + #interrupt-cells = <2>; + interrupts-extended = <&gpio7 3 IRQ_TYPE_EDGE_FALLING>; }; gpio_exp_77: gpio@77 { @@ -118,16 +340,8 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - interrupt-parent = <&gpio5>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; - }; - - i2cswitch4: i2c-switch@71 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x71>; - reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + #interrupt-cells = <2>; + interrupts-extended = <&gpio5 9 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -146,6 +360,9 @@ &pciec1 { status = "okay"; + + vpcie1v5-supply = <&pcie_1v5>; + vpcie3v3-supply = <&pcie_3v3>; }; &pfc { @@ -159,28 +376,96 @@ function = "can1"; }; + hdmi1_pins: hdmi1 { + adv7513-interrupt { + pins = "GP_2_14"; + bias-pull-up; + }; + + du { + groups = "du_rgb888", "du_sync", "du_clk_out_0", + "du_disp"; + function = "du"; + }; + }; + hscif0_pins: hscif0 { groups = "hscif0_data", "hscif0_ctrl"; function = "hscif0"; }; + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + scif1_pins: scif1 { - groups = "scif1_data_b", "scif1_ctrl"; + groups = "scif1_data_b"; function = "scif1"; }; + sdhi3_pins: sdhi3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; + }; + + sound_pcm_pins: sound-pcm { + groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; }; }; +&rcar_sound { + pinctrl-0 = <&sound_pins + &sound_clk_pins + &sound_pcm_pins>; +}; + &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; - uart-has-rtscts; status = "okay"; + + gnss { + compatible = "u-blox,neo-m8"; + reset-gpios = <&gpio_exp_75 6 GPIO_ACTIVE_LOW>; + vcc-supply = <®_3p3v>; + current-speed = <9600>; + }; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en>; + vqmmc-supply = <&wlan_en>; + bus-width = <4>; + no-1-8-v; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + max-frequency = <26000000>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupts-extended = <&gpio1 25 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&ssi4 { + shared-pin; }; &usb2_phy0 { @@ -193,3 +478,17 @@ &xhci0 { status = "okay"; }; + +/* + * For sound-test. + * + * We can switch Audio Card for testing + * see also ulcb.dtsi + * + * #include "ulcb-kf-simple-audio-card.dtsi" + * #include "ulcb-kf-simple-audio-card-mix+split.dtsi" + * #include "ulcb-kf-audio-graph-card.dtsi" + * #include "ulcb-kf-audio-graph-card-mix+split.dtsi" + * #include "ulcb-kf-audio-graph-card2-mix+split.dtsi" + */ +#include "ulcb-kf-audio-graph-card2.dtsi" |